Jump to content
SAU Community

Recommended Posts

  • Replies 149
  • Created
  • Last Reply

Top Posters In This Topic

macers is off showground road, up the castle hill end (think it could be old northen raod end) .. ether way its near the shops end, hard to miss, just look for the big yellow thing :D

oh and yep ill be there at macers too at 8am with moanie

All good.

Have just checked the forecast and it looks like we can expect some good weather tomorrow. Hopefully, we can also expect a good turnout, with around 65 RSVPs.

Don't forget to you'll need to have at least ONE current member of the SAU NSW Club in the car to come along (non-members can join on the day). This goes even if you're not planning to do the observation cruise because the entire event, including the barbie, is covered by CAMS permit

Any club member who can't find a passenger but still wants to come to lunch should meet at Krispy Kreme. We'll still need you to sign the entry form and will provide details of the final destination once the last cars doing the observation cruise have left.

Don't forget to fill your tank before getting to the starting point, the cruise to lunch is over 150klm :D

Don't forget to bring a picnic blanket/ chairs etc to plant yourself on at the end

If anyone gets lost in the morning, or has any questions, you can call me on 0412 530 276.

Otherwise see everyone tomorrow!

Kel

Kel can you take me off the list...

I cant make it.....work committments means less time to study.

Silver PM me your number and depending on what time you leave I MAY be able to cruise with ya to the destination

Can you send me a text if you look like making it to lunch?

We'll need to orgainise an entry form for you, just in case you fall on the barbie/ trip in the car park etc etc etc

Thanks

Kel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...