Jump to content
SAU Community

C210 Collection

V8skylineMAN

By V8skylineMAN,
in Classifieds

 Share

Recommended Posts

V8skylineMAN Grand Master

V8skylineMAN

Posted
Posted

1 C210 Coupe 77model, black, needs respray(might be done before sale), 5speed, 253 v8 rebuilt 6 weeks ago, bored 60thou 20thou off the heads, mild cam, flat tops, balanced. r30 suspension and brakes r32 mastercyl , 17in wheels, 2.5in exhaust, stainless muffler. rego

1 C210 coupe 79model, silver, lowered, rb30 in engine bay, auto rb box, vgc, rolled rear guards, needs paint.

1 C210 sedan 81model ,Blue, Power steer, air con, 4wheel discs, completely stock in A1 cond, 14in colour coded mags. rego....needs respray, but not toobad looking as it is.

Spare parts.

R200 long nose diff

R30 disc brake rear end plus diff

3 r30 doors w p/w

5 speed Lseries gbox

auto L series box

15in TRX rims (5)

stock C210 steel dress rims(5)

reco L24 with new extractors and webber carb,and long 5speed, never started

L series near new clutch , pressure plate and flywheel

Power steering setup for C210/r30

S13 front hub

R32 front hubs

C210 heaterbox and core,

various miscellaneous bits and pieces.....take it ALL away for $7000

We have a baby on the way and need to get a decent reliable car with aircon before it arrives.....

post-7874-1132470073.jpg

post-7874-1132470243.jpg

post-7874-1132472157.gif

Link to comment
https://www.sau.com.au/forums/topic/95586-c210-collection/
Share on other sites
  • 9 years later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...