mr_r33gtst Posted November 25, 2005 Share Posted November 25, 2005 most of the time when i quick shift from 1st to 2nd gear i can feel the gears crunching together, but you dont hear much of a crunching.but if i gear down e.g- from 4th to 2nd it never crunches. if im driving normally from 1st to 2nd it doesn't crunch at all. recently did a gear box oil change using standard oil, and was doing it before oil change. would it be my 2nd gear syncros. i heard mayb using redline oil may help.. anyone got any suggestions....cheers Link to comment https://www.sau.com.au/forums/topic/96264-crunching/ Share on other sites More sharing options...
stuartlaw_78 Posted November 25, 2005 Share Posted November 25, 2005 Hi mate... I've got similar problems... I've got an R33 RB25DEt and I love it.. My transmission is fine at slow changes and quick shifting but as soon as I get over about 120km/h... whenever I change gears... the teeth grind... I've been told the syncros are half stuffed.. I don't really know much about transmissions so if anyone else can shed some light on the subject, that'd be great.. I could reccommend changing your oil as well... get some good oil this time.. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1745175 Share on other sites More sharing options...
benl1981 Posted November 25, 2005 Share Posted November 25, 2005 (edited) Redline or use some slick50 treatment. Or Nulon. I think Slick is the best. Couldhelp reduce the problem. Since you have already replaced the oil I would buy a ttreatment of some sort...siphon out a little gearbox oil and add the treatment. Drive for 1000kms see if it gets better...If not - take out a little bit more and add another additive... Not sure if it will be bad to mix but the box doesnt sound thmuch good anyway... Redline is more just a decent gear oil - I think the traeatments have more of a chance of working. Edited November 25, 2005 by benl1981 Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1745471 Share on other sites More sharing options...
mr_r33gtst Posted November 26, 2005 Author Share Posted November 26, 2005 i will try some additive and see how it goes from there.....thanks Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1745878 Share on other sites More sharing options...
Mumbo#5 Posted November 26, 2005 Share Posted November 26, 2005 same problems here.. just make sure your clutch is bled up nicely too.. from all 3 points as this could help. I wouldnt bother with expensive gearbox oil cause if ur synchros are f**ked its only gonna be a waste of money when u can put them towards a synchro set. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1746430 Share on other sites More sharing options...
benl1981 Posted November 26, 2005 Share Posted November 26, 2005 Yeah cheack your master cylineder isn't leaking (look inside the car to check there is no fluid near the pedal box etc)... like mumbo said bleed the line Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1746764 Share on other sites More sharing options...
benm Posted November 26, 2005 Share Posted November 26, 2005 Bleed the slave cylinder. Replace whatever gearbox oil you have in there with Redline Shockproof ($100). Drive steady for 500km and then see how it is... Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1746772 Share on other sites More sharing options...
RB30-POWER Posted November 27, 2005 Share Posted November 27, 2005 What grade oil did you use. VMX80? Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1747314 Share on other sites More sharing options...
mr_r33gtst Posted November 28, 2005 Author Share Posted November 28, 2005 Im not sure..got it done at protek, just asked for standard gearbox oil. I've been told redline is goood, so i will change it to redline shockproof today, n let you's know how i go..... Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1748720 Share on other sites More sharing options...
96GTRman Posted November 28, 2005 Share Posted November 28, 2005 I just changed the oils in my r33 gtr to redline synthetics and the gearbox is alot smoother however I am now getting a clunking noise in reverse that is amplified by this oil. I have been told the noise is normal though but it is anoying. Would recomend it though as it was stiff through the gears before and had a it of a whirring sound coming from the drivetrain that has significantly been reduced. sb.. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1749978 Share on other sites More sharing options...
benm Posted November 28, 2005 Share Posted November 28, 2005 Give it a solid 500km of driving before you make your opinion of it. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1749984 Share on other sites More sharing options...
mr_r33gtst Posted November 29, 2005 Author Share Posted November 29, 2005 i changed my gear box oil to reline synthetic. so far ive driven 150 k's after changing the oil. changing into 2nd doesn't grind and crunch anymore, and the gear shifting has gone smoother. I did not adjust my slave cylinder as the mechanic said i only needed to adjust it if it was crunchin in every gear. So far so good. Thanks for the help! Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1753137 Share on other sites More sharing options...
r33_racer Posted November 30, 2005 Share Posted November 30, 2005 bloudy hell...thats some topshit oil. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1755806 Share on other sites More sharing options...
PATR33 Posted December 1, 2005 Share Posted December 1, 2005 I had synchro issues with 2nd & 4th gears.. Changed to Redline Lightweight Shockproof, synchro issues resolved. I would rather try a $130 high grade oil first than get my box pulled down and the synchro's replaced. Hmmm let me see which is it $130 or $1500 for parts and labour getting the box pulled apart.. Link to comment https://www.sau.com.au/forums/topic/96264-crunching/#findComment-1756664 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now