Stalling 33

[slamm]

Hey all,

just got a SAFC (series 1 blue screen) fitted along with a profec b and I'm stalling quite alot. I don't think its the profec b as it doesn't matter whether its turned on or not it will still stall and i don't see how a boost controller would stall an engine.

Anytime i'll put her in neutral coming up to a light or after a squirt or down a hill she will pretty much stall on me. the revs will fall as they do and keep going down to 400 and then stall etc..

Can somebody give me a clue as to what i might need to do to alter something in the safc to help? I will try this rather than taking it back to mechanic who installed it first as i reckon it might be pretty simple but i just have no clue as to what air/fuel ratio to change or something like that. Am i on the right track?

thanks

[Wink]

Do you have an atmo or plumback bov?

[slamm]

Do you have an atmo or plumback bov?

<{POST_SNAPBACK}>

standard plumback

[xr8eater]

you may need a new O2 sensor it fixed my stalling problem

[Miller the hoon]

Did the mechanic do a road test?

take it back if you play around and not no wat you are doing you might do some damage

It sould be under warrenty for being tuned

james

[justin911]

on your safc do you have any adjustments made in the 'lo-throttle' section ?

i remember when i used to have my safc2, a couple of people had your issue, and they seemed to have adjustments in the lo-throttle section..

[predator]

I have a feeling you've got a dicky AFM wire to the ECU which is going on and off now and then.. recheck all wiring to the SAFC.