Jump to content
SAU Community

Consider A Tt Soop? 6sp $25k Best Offer Accepted!

speedr

By speedr,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

speedr Rookie

speedr

Posted
Posted (edited)

Hello! Must sell, Make any reasonable offer. Grab a bargain - this car is well worth closer to $30k.

The Soop is Red, with factory side and rear body kit. Has a standard front. Body is totally straight, with one small dent, 3cm long, barely noticeable, on the front left guard. The price includes factory grey rims, but for an extra $500 you can upgrade to 17" 5 spoke chromes (currently fitted)

Has a number of bolt on modifications only: has K&N pod filter, BOV, HKS turbo timer, 4" exhaust, 4.5" tip and APEXi Power Meter, with Blitz ECU, Apexi Rev/Speed meter/timer. There are 5 various gauges on the console/glove box. Interior is nice and clean, with a classy woodtrim-like console (better than standard black). Also comes with high mounted radar detector! (worth $$ dont tell anyone) Full size BBS spare wheel. This must be the fastest Soop under $30k!

I will throw in a free set of 4 softer springs... the current springs are rather firm in contrast.

Amazing potential for Mods!

Engine Mechanics are untouched. Car travelled 62,100km.

Please note that this car must sell quickly - and any reasonable offer for this sensation twin turbo will be accepted - if your ready, you can be driving this tomorrow if you want! This is a bloody fast car, and noticably quicker than a stock twin turbo. It does insanely fast starts - at the expense of a bit of rubber, but the smile on the face :) ....priceless!

I will be moving to Brisbane mid-dec and would prefer to sell in Melb, but for any QLD interest, let me know and we can come to an arrangement. I already bought an Audi Quattro, and I totally, totally totally have loved every single moment with the soop, but my woman wants a more 'family orientated car' so the time has come for you to now enjoy this amazing machine.

Thanks for your interest!

Jason Baeck

0401136009

(03) 95274634

[email protected] (for plenty more pics)

post-25004-1133009065.jpg

post-25004-1133009114.jpg

post-25004-1133009158.jpg

post-25004-1133009205.jpg

post-25004-1133009287.jpg

Edited by speedr
speedr Rookie

speedr

Posted
  • Author
Posted

Its a 93. Just imported midyear, hence low jap Kms. I have no license anymore so im just wanting cash so when i get the license back, im ready to buy another turbo.

Cheers Jason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...