Jump to content
SAU Community

Recommended Posts

Hi all,

I was just wondering if anyone would be interested in going for a cruise this Saturday night. If I dont get a postive feedback we will be meeting at Auburn McDonalds around 9pm, but if I get some feedback I will change the venue to somewhere bigger like Homebush Carpark P6. Now I know you are all wondering where are we gonna cruise to? I honestly dont know. I guess we will end up in the city evenually but I am open to suggestions on the night and we can all decide then. This cruise is not just for Skyline but for anyone who wants to come, 4's, 6's, 8's and rotors all welcome. So far the cars coming

R34 GTR

R32 GTR

R33 GTST

350Z

EVO 7

Ok I hope to hear from anyone interested, and as I said before if I dont get much feedback we will be meeting at Auburn McDonalds at 9pm

Ok Thanks

Link to comment
https://www.sau.com.au/forums/topic/97412-saturday-night-cruise/
Share on other sites

Hey guys thanks for the feedback.

The reason for the cruise is because this is the only time im avaliable to cruise as I am extremly busy until after Xmas, and then after Xmas alot of my friends are going oversears before and on Xmas day. So sorry for any inconvience.

Definetly down to cruise to bondi then brighton le sands. As alot of us attending the cruise have work the next day. So it will not be too late.

Thanks Sam

i mite attend

if so, c u then

Hey Alien

do you have a R34 GTR V SPEC 2 NUR??

that would be awesome if you could make it.

Hopefully there will be a unique R34 GTR so hope you can make it.

I would say that Auburn McD's will be packed on Sat night as the Krispy Cremes outlet has just opened.

Hey Guys and Gals,

Charlie has a point. If anyone has any other suggestions to meet up at would be great! Let us know plz ( Maybe just downt the road from Auburn ) any suggestions will be great thanks



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...