Jump to content
SAU Community

Fs: Amd 64bit Cpu And Other Computer Gear

r32_sky

By r32_sky,
in For Sale (Other Items)

 Share

Recommended Posts

r32_sky Contributor

r32_sky

Posted
Posted (edited)

Hi all,

Ok first item is an AMD Sempron 64bit 2500+ CPU Socket 754. I originally purchased it then realised that my motherboard only supported 64bit Althon processors and not the Sempron processors. Anyways, my loss is your gain. Only about 2 months old and it has never been used. I only installed it onto the motherboard, then realised it didnt work. This is a retail box too.

Only asking $50 plus postage.

img02245aq.jpg

I also have a legendary 3dfx VooDoo 5 5500 video card. One of the first 64Mb video cards around. I have used it up until recently and it has always performed perfectly. I really dont know what these are worth nowadays but i guess just for sentimental value i would like around $50 plus postage.

img02275wl.jpg

I have a Asus A7V133 motherboard coupled with an AMD Duron 750MHz processor and 384Mb of PC-133 ram (3 x 128Mb sticks). It comes complete and working and was actually quite a good little system to run. Asking $100 plus postage for this system.

img02308az.jpg

I also have a Soundblaster Live video card, a good 56k modem, Asus A7Pro motherboard, a AOpen Motherboard with a Celeron 333MHz and 64Mb PC100 ram on it in my closet if anyone is interested. Make offers on any of those parts.

Everything works, the only thing wrong with any of these parts is that they have a bit of dust on them :D

I am located in Murwillumbah which is about 40 minutes south of the NSW/QLD border or around 1 hours and 50 minutes south of Brisbane. Pickup is welcome, but if you would like a postage quote, go to auspost.com and my postage code is 2484.

If you have any more questions, feel free to pm me or email me.

Thanks

Edited by r32_sky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Yeetus
      98 R34GTT 4k engine stumble

      By Yeetus · Posted

      Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • GTSBoy
      98 R34GTT 4k engine stumble

      By GTSBoy · Posted

      Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...