Jump to content
SAU Community

Recommended Posts

Hey,

Just wondering how good stock shocks are. I have an R33 gtst sedan and replaced the rear shocks with KYB stockers...car handles a lot better. When I did this I put new dust boots on and noticed the fronts were bad aswell. Took them off aswell and took all 4 assemblies to the mechanic and he swapped in the 2 new struts and put boots on the old front ones.

He said the fronts were in bad shape aswell but you dont really notice it when you push on the corners.

Now I can get new KYBs for $130 each. Am I better off getting something adjustable. Is it worth having just the fronts adjustable?

Im only looking at having maybe 1-2 track days a year.

Also I dont want to reduce ride height as even now I only just get up our driveway without scrappage.

.

The car drives pretty well now but I think I can hear one of the front shcoks bouncing around. One of the rears you push the shock shaft in and it didn't come out at all. I think the mechanic said one of the fronts was in a similar state.

Wish he told me before he put them together - would have done them all at once.

Thanks

Edited by benl1981
  • 2 weeks later...

Still deciding...looking for a range of responses on how hard the bilstiens make the ride using standard springs.

Anybody got comments about there newly replaced stock suspension or bilstein...?

Thanks

Looking only to replace the front shocks..as rear are new..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...