Jump to content
SAU Community

Recommended Posts

Guest <NIS_02>

Jet33

The turbo is a Garrett T28, It has a ceramic wheel, non ball bearing, I wouldnt push boost past 12psi on everyday driving, but it can handle 15psi with cold air temps outside, but only every so often, not advisable to run 15psi hard consistently

Hope I helped u out mate

Link to comment
https://www.sau.com.au/forums/topic/9810-r33-turbo/#findComment-151649
Share on other sites

Originally posted by

as u can see I got 225HP @ 14 psi of boost, that about 40HP increase over standard, which runs around 10psi at 5000rpm, with a more free flowing exhaust expect another 20HP easily at the treads :P

Are you sure those figures are right. My r33 got 232 rwhp @ 6500 with just a cat back, pod and remapped ecu & 10psi.

Link to comment
https://www.sau.com.au/forums/topic/9810-r33-turbo/#findComment-151736
Share on other sites

I think the R33 turbo's are T3 flange with T28 internals or something wierd like that.

Yepp, a T3/T4 will bolt onto the factory T3 flange inlet manifold, but I think you need to make up a new dump pipe.

And as stated before, boosting above 12-14psi may have you looking in your cat converter for part of your turbo !!

Link to comment
https://www.sau.com.au/forums/topic/9810-r33-turbo/#findComment-151845
Share on other sites

my gtst had a ihi turbo, ceramic with steel bearings, couldnt run much boost withit it, about 9psi. t28

took it of and took it 2 garret and they turned it into a t3/t4, now i run about 10/11psi and the car screams, i need to put a cooler on if i want 2 run more boost,

also it feels like the car doesnt strain as much as it did b4

Link to comment
https://www.sau.com.au/forums/topic/9810-r33-turbo/#findComment-152069
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...