Jump to content
SAU Community

Recommended Posts

  • Replies 120
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Supercheap at bondi has 2 bottles or red Duplicolor and 3 purple ones.

Looks like we are gonna just cruise tomorw..

Shado34 think we are reschedulling

tomorrow? i think u mean monday!!

the local places near me are all out of VHT, which i think is a good thing, lets use the duplicolor, and plan it all in advance, like lets set a date now, and work on getting the bits between now and then (say like 3 weeks time?) i know that means we will have to find another spot though ;)

I will be having a wheel balance done when I have adjustable castor rods put in; otherwise it's a double exercise which will cost twice as much :(

I don't think you will need a wheel alignment or balance after doing this... you just need to make sure your wheels go back on properly!

Sam, at the moment it doesn't look like we'll be doing it.... not enough paint going around (can't get a big enough high LOL)

So we'll probably end up cruising instead!

Chatswood meet 10am :(

So............is it a cruise now?

Where to?

Chatswood 10am sounds ok, if only i knew my way around Chatswood

:)

Doodz, lets meet up before hand, i can cruise to your area and go up the ED??

if this ever happens.. i'd like to come along....i'll be in the stands having a beer wiff DUN-CAN.....but we'll never ever ever get ro-lling drunk.... (thought this would be about the only opportunity i'd have to use that line..... )

if this is between 2nd of Jan and the 10th of Jan, I'm so in. I'll even do my best to hunt down some Metalcast cans for teh cef to bling with.

Currently 5 cans plus base coat at Supercheap Epping :huh:

Get red too you bloody pimp and not the purple or other stupid colours. (BTW Midnight purple IS cool!)

OK

N1GTR and a few others have concluded that this MUST be re-scheduled :( We've hyped ourselves up too much to pull out now :huh: I'm definitely in but firstly...

Questions:

1) Date

2) Location (my original location is now void due to dates)

3) Paints (which is best and where from)

Thanks guys

Stan




  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...