Jump to content
SAU Community

Recommended Posts

this is how i did it in my r32 i have a greddy catch can i made my own 'bracket' out of this metal thingy that your guttering up works a treat and used to have it cliped around my battery but i have to turn it around and couldnt use the bracket dodgey! so i ended up shortening my 'bracket' and pot riveting it to the fuse box jigger above the battery as you can see ive followed sydneykids instructions and i have the full plumb back.

cheers.

ps sorry about the dodgey phone pics! :huh:

post-16065-1135817146.jpg

post-16065-1135817216.jpg

post-16065-1135817254.jpg

ahhh yeah to keep everything plumbed back so i dont need a filter suposedly if you block things off thats pressure and u need the filter but its all connect as if standard so its ok no extra pressure just running through the can

Wicked setup... I have bought a "Drift" one from Autobarn cuz the 1 litre Greddy one wouldn't fit in my engine bay... D'oh... (however, this Drift one does have an oil level pipe on the side, so you can see how full it is) But I was scratching my head to plug up the "return pipes" but now I will do the same as this one... Thanks for the pictures, and just in time too :D

gt-t r34 - I'd recommend going and spending a little bit of money and grab some more hoses clamps... for saftey and security on all hose connections... unless you were recommended not to use these??:D

Regards,

Grant

Edited by QUIKBLADE
I dont quite understand what you are saying

Jshop Catch cans are like the Autobarn ones with the Level on the side

If you're referring to what I've said... I don't know the J-Shop ones, but that's good that they have the level on them... at least you know when to empty!! :( Also, the Autobarn "DRIFT" branded 500ml ones (upon closer inspection) look like Greddy 500ml knock-offs :( But meh, should be just as functional.

Regards,

Grant

dont worry i was being stupid!

anyway as for those extra clamps i had cable ties on there coz i ran out of clamps but they must have cut them off when i got it serviced havent had any oil leak out and they are on there very tight ill just see how it goes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...