shmiddy

are you serious, did you leave it in a carpark and someone took to it and broke it, man that has to suck balls big time, i just got a new frount bar and ive already smashed it twice on kerbs, but only poped out and cracked were the screws near the wheel arch hold it, but if someone intentionly cracked it then goes to show there are some serious crack heads out there

anyone know any good places to re trim doors and seats in perth???

dono i didnt use clear, i wash my car once a week anyways so brake dust dont last to long

ok, long story short, came out a mates house, didnt relise how f*&^ed his kirb was and bammmm!!!! new gtr frount bar was dragin on the ground, the fact that where i got it fitted in perth were the most dodgies tools goin around didnt help, anyways i took it of got gf to put it in her car, drove it home with no frount bar, must say it looks awsome with just the fmic starin at ya, anyways what ya need are *battery drill with a 1/8 drill bit *pop rivits *some sore of steel plate, u used steel angle but smashed it down flat and cut it down to fit, anyways 1st thing i did was get rid of that crappy plastic under the wheel arches, all it does is get in the way, then take the bumper of, get your steel plate and cut a long peice around 200mm long by roughly 25mm wide, fit it under the lip were ya holes on the fender have already split, cracked, whatever... then drill and pop rivit every hmmmmm say 1 inch, otherwise if there to close it will still be quite brittle, also be carefull that once one pop rivits are and and while drilling in new rivits, that the steel plate doesnt get to hot,, it can cause the pop rivits to heat up and bust out, so just take it easy and get a good amount in there, then once that is all in nice and hard, estimate where your screw is gona go to screw it back onto the car with, then using a 5,6mm drill bit drill it in, pre drill with the 1/8th bit 1st and also remember to not let it get to hot, if ya cant make any sense of this, i got some pics below of what i did, hope it helps

dan you were right the 1st time, just found out they are sparco NS2 Speeder's

does anyone know what lind of wheels these are, there on my line and im gettin some new dubs pritty soon, but i wana know what these ones i got on here now are

here ya go fellas here is some pics of my calipers with the wheels on, thought while i had the camera out ild snap a few of the line too ahhah enjoy

i have a r33 95 series 1 frount bar lyin around im in perth so a perth sale only, it is the bar in my pic <---------------------- comes with indicators and mesh, and is already cut for an intercooler, anyone in perth interested make me an offer, is a little scratched up due to the shop who put my new one on throwin it round after the took it of thinkn i didnt want it no more, but no cracks or anything...

after new intercooler piping, stainless steel, anyone know of any good kits goin around,

yeah sure ill take some and have em up by the weekend, the stand out like dogs balls, and because of the anodized effect in different lights its a different blue, like a harlequem paint, i also did my wheel nuts blue with it to, but ill get ya some more pics up shortly, i still gotta do my back ones so i might do a step by step thread with pics of each thread and goods used since i had heaps of feed back about this paint

usually fat people wearing fubu or dada or some stupid wanabee gangsta crap, what happened to the good old days when a torana or a comodore were driven by ya typicalt shaved head or mullet, flanno wearin, tight ass black jeans with db's, now ya get all these new comercal young bogans in there holdens wearin ny yankee hats to the side(wich ask them to name 5 playes from the yankees and well see if they can), buttonup pants and fubu or even dada, i mean fair enuf if ya strollin through midland at 3am the day after dole day then i would expect to see this, but why cant we some how get rid of these comfused 1/2 wigger, but yet still play pantera in the cd player but i got a ja rule or fiddy cent cd next to them in the cd stacker, im sorry but i just cant deal with this, coming from high wycombe and havin older brothers who were all bogan as lookin like somethin of skinhead and they all knew how to work on engines its really put a sour taste in my mouth, back in the day bogans were north and south of the river and everywere, nowdays there like the southern white rhino, they should be on the 5c peice somewhat of a national treasure, and now when ya see a sweet lookin torry or commodore or manaro posibly charger also with a f%7^ off were full sticker on it or a holden pisses on jap crap sticker it makes ya wana follow them home and give them a hug for keepin the bogan dream alive, and another thing while were on it is with these new generation bogans (newogans) all have fat gf's who will tell you how there bf's stock vk will thrash your jap crap, all made even more funnier by her pregnet gut hanging out of her 3 sizes to small hrt shirt that she got at the 99 v8 supercars at wanneroo, and slightly faded is the craig loundes signiture on it, but no thats not enough, instead of already disgracing the old skool gogan thes newogans decide that in order to be even kooler, yes even kooler then the dada and fubu, yes even more cooler then the fat gf with gutrolls hangin out the side and more makeup them wacko jacko, no that all isnt enough, instead what they do is proberly one of the biggest car mod a newogan can do, posibly even take out a loan to do it, it is........the play boy bunny sticker..... but we wont get one or 2 small 50mm stickers no, insted the whole back windo looks like a rabbit, does anyone els share this problem or is it just me, bring bak the old skool bogan

can anyone supply pics of them?? wana see what they look like

look n group buys and get onto btmbl

just got white paint and did them with a brush, took time got them near on perfect becarfull not to put to much paint on bruch or it floods everwere over the nissan and beyond

anyone help me in takin the valve cover of the top of my engine, i wana clean it and paint it but is it a hard job???

autoone in cannington, yeah pritty sure they had silver, the primer is a silver anodized anyways, but go check them out, i guess any autoone store,

yeah its a wiked paint, they turn out soooo dope, and i think its cheaper then normal stuff, i had that cull vht crap b4 but this is the stuf ya want

na mate just 2 bolts and the brake line, then to put back on just seperate the pads, and put bolts and line bak on, that easy, then bleed ya brakes all good

yeah u take them of completly, i went through 1 can of primer stuff, one can of blue for the frount, and still got enough for a 3rd i recon, with ya car i recon a gold would look ok, whatever ya color scheme is, i recon black and green go ok too, but dono if they will suit the white rim

just find out if she has any pets, kidnap them, send her bits of its fur in a letter askin for the money to replace your car damage, but make sure you do this properly, like the movie the bodygaurd, get newspaper clippings of each letter and glue them together and maked a wicked ransom letter, never know it might just work, ifnot then she has called your bluff and just take her pets home, done hurt it, maybe shave its head or something that wont hurt it, or get a photo of her cut her head out and put it on naked bodies and post it around, im sure that will piss her of, though we got in alot of trouble over that one at school

cheers man, i had them a flat blue before, but was so dull, it comes in red gold green, heaps of sick colors, all i did was give them a sand down till was smooth, then got mag cleaner to get all the brake dust of, then just prepsol, left them to dry, 4 coats of silver primer, 4 coats of blue, just one thing, make sure you get all the brake fluid out of the caliper cos it can oozz out 1/2 way through and wreck it, and also becarful the brake line is clean when reattatchin it,

that sucks dude, i recently to my care to a joint 2 weeks ago to get a new frount bar put on, it was also my birthday present, must be the birthday jinx, and when i came to pick it up i noticed the seat had been moved, so more then likly taken for a thrash, i also noticed burnout marks everywere leadin out of the joint and the corner it was on, when they sprayed it they got paint dust crap allover my car, and they guy who moved it in or out must of had paint on his hands cos it was all over my steering wheel and white paint on my door trim, then i drove of and they didnt fit my number plate, but hey the bumper looks a million bucks

since i cant offord big flash new brakes i decided to dress up my crappy old calipers, i went and bought some dupli-color, metalcast anodized paint, i selected blue took it to the counter and the guy told me i needed the proper primer for it, i thought he was just tryin to scam me, but you do actuly need it to create the shinny reflective anodized look, i painted them and they turned out really good since my rim's have already got anodized blue in them they matched really trick, it is heat proof specificly for calipers and rocker covers ect ect, im gona do my valve cover also so ill let yas know how it turns out, but its really goot for dressin those dull parts up,

yeah im in to, will deposit money within next 2 weeks mate

i think this guy has mysteriously dissapeared, i havent heard from him like a month ago ahhaha