West

Hi all, as topic stated, anyone know much about KSP ENGINEERING? Any info would be much appriciated.

95Octane? That sounds shocking. You sure man, if it is then no doubt you're making that power!

Depend on the condition of your engine too by the way. What does Ben say about that? I'm sure Ben can extract more out of it. Mine is a 94R32 with 14psi making 250kw@rear, with Ben's tune ofcourse. You're sure your is @AW not rear?

Will we get our hand on these before Chrissy? It'll be fun on my camping trip!

Shouldn't you making 350kw+ ?

I rocked up 3 hours late, i though everyone hang around a bit since its such a nice say . Will definately be at the last monthly meeting for this year.

Buy a 94 like mine or buy an 89 and take it to Racepace .

I have a good one for sale, pm me.

Did they forget that the 33 broke that Nurginburd ring ( <--spelling ) record back in 1995 i think! All gtrs are nice, easy daily driving well unless you're planing to run 400kw@allfour otherwise its all good.

Well you've been towing our cars for an excellent rate now we'll chuck you in the back of your own truck with 5 stripers and we drive you around the city .

A mesage from GIZMO themself! ...and AutoBarn only sell them for $170 each.

As topic stated, i need a stagea cup holder. It's a project. Also R32 left hand head light, damage but not too much on structure.

Have a feeling i'm goona win everything lol.

Still looking at SAU sponsors see if they can come up with anything nice but also i've email Gizmo Newzealand.

Just copy and fill in the table; Skyline model = R32GTR Wheel diameter = 17X9 all round Wheel width = 9 Wheel offset = +17 Tyre size = 235 front 265 back Modifications to fit = Nil Brand = Volk GTP

Good day all, just a quick question about lowering. Why is it some car has lowering job all evenly front and rear yet some (mine) has front lower than rear? What's the go?

http://www.skylinesaustralia.com/forums/in...?act=SF&s=&f=61 500 to 16,000 RPM range Full RISC Micro-processor design Simplistic operation, 2 buttons 7 Matrix LED No extras required. No knobs to turn, no wires to cut, no pills to buy 16bit counting resolution Super small dimensions a Supplied complete with loom and accessories 3 wire design to reduce installation costs The Gizzmo Dual Stage Shiftlamp utilises a polished blue anodised aluminum casing to host a matrix of ultra-bright LED’s. The two-colour LED matrix provides an unmistakable indication as to which rpm stage has been reached. The first stage illuminates the yellow ultra-bright center LED. The second or final stage illuminates the outer ring of 6 ultra-bright red LED’s signaling the change point.The Gizzmo dual stage shiftlamp only requires a basic 3-wire installation, and uses a simple two-button configuration for its operation. Hope this will raise a few interest. DUALSTAGE.pdf

Good day all, there seem to be a fair feel number of interest in the GIZZMO shift light, i'm just wondering if any sponsors, any indivitual, anyone that has the connection want to help us out and start up a group buy for these GIZZMO shift light? Thanks 500 to 16,000 RPM range Full RISC Micro-processor design Simplistic operation, 2 buttons 7 Matrix LED No extras required. No knobs to turn, no wires to cut, no pills to buy 16bit counting resolution Super small dimensions a Supplied complete with loom and accessories 3 wire design to reduce installation costs The Gizzmo Dual Stage Shiftlamp utilises a polished blue anodised aluminum casing to host a matrix of ultra-bright LED’s. The two-colour LED matrix provides an unmistakable indication as to which rpm stage has been reached. The first stage illuminates the yellow ultra-bright center LED. The second or final stage illuminates the outer ring of 6 ultra-bright red LED’s signaling the change point.The Gizzmo dual stage shiftlamp only requires a basic 3-wire installation, and uses a simple two-button configuration for its operation.

I'll still go to support whether there is jap drifter or not.

Its' the clutch bearing i believe.

Yeap, definately. You know i've always consider a vent. Let me know so we can get the bonnet respray as well Troy.

Next time ....time is UP ! More pics...

So the motorbike has the same thing is it Troy? Who in Melb has them? I'll grab it and then *you* know the drill!!

Sticky this thread.

Damn, waste all my researching time Troy . You have always been the man. Hold on, what about the hole on Nissan pdf i posted up ealier?