zelda

No - thanks

Unsure if it's for vpro gold? I was under the assumption they only Had just the one type of harness that suited all, if their is a way of checking I will check for sure, yes for vq25det. Not really sure what it's worth, all I know is that they are dam hard to get!

Hey guys, Unfortunately my situation is changing and buying a house doesn't leave me much coin to work on my stagea as much as I would like to, So I have an f con harness I am will willing to ship to Aus. Someone on here will definitely put it to good use. I will consider swaps/ deals for good condition high flows or nismo ECU and can do some cash either way. Taking offers at this stage, will upload pics when I get home

where abouts in NZ man?

Still got the suction pipe? Any pics please pm me thanks. P.s only if your interested in shipping to NZ

Had same problem, replaced belts and bearing, the belts were more expensive than the bearing but it's a fairly simple task even if you took it to a mechanic it still won't cost an arm. Problem fixed, don't waste your time with remedies that don't actually fix anything

Removed the silly little bung under the battery tray, to my delight it was clean and dry, and did the brake cut mod using a simple switch by the headlight adjustments, time for a hoon !

Just a heads up I run 245 45s on 18x10 15p rears on my s1 NM. Lips rolled out and about 10 mm pumping cleared it sweet. Hope this helps

Got a mate of a mate of a mate to respray my front bumper a while back, took it off for him, paid upfront only for a 8 day turn around which resulted in orange peel finish and some bugs in the clear, which might I add was still soft when I drove an hour to pick it up... Lesson learnt

No coolant loss, hard to describe but it's like a chirping sound proportional with revs, comes and goes, my guess is the bearing attached to the pulley on the pump itself might be on its way... Which yeah, could be a major, I'm quite rookie at this fault finding stuff lol

Put some new rims on, finally gave it a well deserved wash too !

Dragging up an old one here, the bearing on my aircon pump or tensioner Seems to be on its way out, I can't quite put my finger on it, has anyone replaced this before? Don't want to pull it off without parts on hand, anyone know the part numbers? Many thanks,

So what is exactly involved with converting an NM35 to rwd manual? Mechanically I get but ECU wise?? I'm looking down this path also as I reckon it would be a bag of fun and agree with Bergeron

That wouldn't be making my suction pipe would it?? ?

Thanks Dale. Typical, straight after posting that i found the thread I overlooked.

Hey guys, didn't want to start a new thread. Mine has the same code coming up. Vac lines replaced and cable tied. Car seems to run fine but don't want to go and blow it... However I want to change the fuel pump anyway, is there a write up on this?? Can't seem to find one for the life of me. Would be happy to take pics and do a write up if that is the case. So does anyone have a part number for the external filter? What's the best drop in pump to use and so on... Your wisdom is greatly appreciated as always. Zach

Cheers mate, I have come across the website before I'll send an e mail. Thanks

Allgood, have you guys got a link to who would sell them direct to nz? Iv tried the supplier here with no response?

Fair call Dale. If anybody wants a good price over the ditch you know who to pm lol.. Feel sorry for you Aussies sometimes ?

$500? I had all that done at Bridgestone in nz with a second free wheel align a month later for $180 and it didn't budge after a month of heavy testing lol

+1 bc cheap nd sweet

Only the nismo for me, I looked on here before buying one luckily. So mishimoto do drop in ? I'm not to worried about cutting the shroud down but it makes life easier, considering the amount of effort it takes to bleed it right. Thanks

Hey guys, Iv just purchased low temp thermo and new hoses for my nm35.. Alloy radiator is next on the list but there seems to be a few out there, Iv done a bit of digging but can't pin point what exactly is the best option, some require trimming the shroud etc, eBay has a couple of cheaper ones, a Sydney based one and one seems to be a Chinese one called winner racing ( doesn't sound like a winner to me) Just want to hear best options/best price and feedback before I go and throw a few bucks at one. Zach

-oliveR that looks really nice man, good fitment, but what was the reason for different profiles and width if you don't mind sharing? RWD I'm guessing also?