Sinista32

ET is the short form of the German word 'Einpresstiefe' which literally translates as 'insertion depth' What does Offset mean? Offset is the distance between the hub mounting face at the back of the wheel and the wheel's centreline. Offset is usually stamped or engraved into the wheel and is measured in millimetres of 'ET' [ET is the short form of the German word 'Einpresstiefe' which literally translates as 'insertion depth'] Positive Offset wheels have their mounting face toward the front face of the wheel. Most front wheel drive vehicles have positive ET wheels. Eighties and Nineties Volkswagen wheels are usually ET38. Zero Offset wheels have their mounting face even with the centerline of the wheel and are by definition "ET 0". Negative Offset wheels have their mounting face toward the rear of the wheel - powerful rear-wheel drive cars often have wheels with negative offset.

Your right - here is something

this morning

No not yet Jez. It would fun and show me some perspective. Would also be able to make comparisons. I'm sure the bug will bite hard when I do to keep going for PB's. Raises questions about how to launch better

Thanks Jez. Always thought it was odd.to be correct based on the -7 capabilities - now confirmed. cheers. I wouldn't mind learning more about reading the graphs and how the dyno's are set up. It does feel nice to me on the road

and siged

1993 R32 GTR Rebuilt RB26 2860-7's Haltech - mafless Tomie Type B cams, Adjustable cam gears 700cc injectors Nitto/JE pistons 98ron 326kws at 18psi 350kws at 21psi Correction - ^ 2nd run at a different Ramp Rate skewing output figures ^

Will post... May have something in there from a while ago - cant remember

326kws at 18psi 350kws at 21psi I wonder if yours are HKS 2530's ? Good for 400kws+

my -7's, 350kws (469hp) no more puff - all gonski's. Expect my Dyno Dynamics lied a little too. RB26 Forgie with Tomie Poncams Suggest your Turbo's are something larger. But it doesn't matter. Good figures

NP mate I'd move quickly as I reckon this will be sought after by many

Japanese Import Spares Brand New OEM Front Diffuser Give em a call - no price listed

I also bought an adjustable LED one from Repco. Should be there from compliance but I beleive there all aftermarket fitment. Something similar to these

Never seen anything like that. Sure it's not aftermarket ?

Picture of area ?

check this Numberplate thread - some laughs in there

Orange 33 with RB-025 plates from greenway to the city this morning

Thats my last ditch effort too. I've recently bought a recoed brake booster with a new flange in it. Also dont have it on yet.

only just but yeah you're right

http://www.youtube.c...n-bL0NWc#t=286s repost from ACT section. Grumble bee 4.50

^can be grumpy^ do not poke likes Pina Coladas and getting caught in the rain

265/35/R19 +20 - 35 being (wall height) % of 265 (width). No scrub There is a +/- 10% variation allowable in tyre size. RSR's are on the plus side of this.

<- --- Nice payback - goes to proove that we have ghosting stawka's online

My 34 ticks - I dont worry too much about it 32 just has lumpy cams - different sound Mx 5 ticks but goes away after warming. Seems to be lifters. Big end bearing is unmistakale so doubt it.. Lol - Piston Slap, awesome fear factor. That'll make him shit kitttens.