Coupe-This

Hello there, i have a pair of hertz air mille 3800 subwoofers up for grabs, i would prefer not to seperate them. I am after $650 for them + postage. I also have some 5 1/4 hi energy speakers up and some kenwood 6x9's going cheap.

Thanks for all your help people, firstly i must say, the reason im wanting to go stainless steel is because the rest of my exhaust is stainless steel and if you go putting mild steel and stainless steel together you get what is called electrolosis (spelling :s) which is in a simple word, rust. and thus eating away at your exhaust system slowly. Bigger it will most likely be

Cool, thanks for that, it would be highly appreciated as i dont want to pay ridiculous amounts just to tap in 2 wires.

They seem to be only availible for the rb26dett, although i cant read a thing on that page, thats what i have figured out. :s this is just going on a r33 gtst

hey guys, i am in no worry about actually wiring the timer into the ignition harness but i dont know what wires to wire up near the ecu. The handbrake cable i beleive wont really be an issue. But i need the rpm signal wire and speed sensor wire.

Hey guys, im just getting a price off CES for a stainless steel twin dump pipe. Now these arent availible off the shelf because the wastegate pipe is 1.5" (inches) in diameter and that size isnt availible in stainless steel. Now, I am getting one made still, but i have to decide whether i go a little bit smaller in the wastegate pipe or a little bit bigger. What you reckon guys?

Hey guys, i have no idea where to hook up my Luminance wire onto the jvc deck, do i splice it into the accessories or something? all is plugged up apart from this one wire, thanks for your help.

Hey guys, i got an aerpro ap743 frequency converter from autobarn because its the one they said would be ok. Now i've been reading the stereo install thread on the r33 (which ill be doing). Now i have the single din tape deck in my r33 (stock unit) and will be putting a single din jvc exad unit. Now my question is, will i need the Nissan Diversity Adaptor AP348A (aerpro) adapter for the radio. i think i will be taking this item back. But i would just like to know if i even need the adapter to start with. will need to know soon unfortunatly. would like to know by the monday if possible. thanks for all your help guys.

Haha, whoops my bad, post is now edited and mentions a r33 series 1.5

Hey guys i currently have the stock speakers in my r33 series 1.5 and im just wondering what size speakers will fit straight in without any (or very little) modification. Would 6" + tweeters for the front and 6.5" 2 way coax's be ok for the back, or just 6"

CES dont do a stainless steel twin dump pipe, hmmm i would of liked one myself is there any major differance between the coated and non coated versions? They sent me some pictures and some of the twin dump pipes look to be in stainless :s ... maybe just not in the r33 gtst. there reason for this is because they cant get a stainless steel tubing the right size for the waste gate (1.5' I.D) and the I.D of the main pipe is 2.875 which would equate to 3" pretty much. i really didnt want to mix mild steel with stainless. thats my main concern. any ideas :s

Hey guys im thinking of placing my boost guage just left of the instrument cluster and an avc-r boost controller next to that, so virtually just above the two middel air vents. Now to get the electrical wires out of site, out of mind i was going to drill 1 hole into the crash pad and get all the wires through there and thinking of either putting a grommet in there or something else i can pinch of the sparkies at work ... my question is, is this a sensible thing to do, like will the crashpad end up cracking at all because of the hole i have drilled? or are there easy ways to get around this?

hey guys, i was just wondering if you think twin dump pipes are worth the extra money, i was quoted $650 for a painted mild steel one of CES. Now i was wanting a stainless steel twin dump pipe and that would be even more extra $$$ ? i have a cat back exhaust on already and just upgrading the cat and dump pipe.

must be a leak near the t piece then cause it was working fine befor i installed it. :s damn it ... unless its a leak on the new piece of hose i installed. :s ... is there an easy way to check all this ?

hey everyone, i have just installed (Well half installed) a electrical boost gauge. i set up the map sensor for the boost vacuum line and piped up the pressure hose between the plenum and the fuel regulator? well anyways i haven't wired it up yet, but the stock boost gauge is now a fair bit out, it wont even read + anything. and boost is still coming on, can feel it. is it a simplematter of recalibrating it or is there a better suited place i can hook up the t piece to?

I'd be interested, depending on numbers also, but you can pretty much put me down for one !!!!

Im looking at getting a power fc ecu and getting an avc-r. pretty much all i need. Is this stupid?

Hey guys, i am just curious what you guys would prefer a boost guage, or boost/vac guage ? and im thinking bout getting ONE guage piller just to keep it neat and tidy. thanks

Hey guys, i just have a crappy tape deck in my series 1.5 gtst and not a double din peice, i have a tray with a door under it and was wondering if i fit a normal din headunit can i still just use this, as i think this would look heaps better than a tray.

hey guys, im just curious to know when giving my near stock r33 a bit of a hard time i notice the boost guage sits just above the 0 mark, and the other night when going up some steep hills it pushed around +4psi... im just wondering, whats going on here :s

I am in need of a new dump pipe, where can i get one of these trust or ces dump pipes? cheers

I've got a series 1.5 cant exactly check right now (looks outside) its a bit dark. ill try and check it out tomorrow and report it to ya'll

hey guys, i have some clear side indicators, and before trying to attempt to puttin them on im wondering if anyone else here has done it and cld tell me roughly what todo, what to expect etc ... also i have a series 1.5 andnwant to modify the front bar to show the intercooler. i want to cut it in a couple of places and get it all fixed up nicely (done by a pro) have a business associate who works in a panel shop we deal with ... i will post a pic of what i want to do ... its a m-spec too, if that makes any differance. cheers

sorry, was in a rush to get them posted as i had to quickly jump off. will edit the prices up tomorrow. the 3 amps have been sold, sorry

im interested, how long would it take to get here though?