Deano 1

Brand New Pistions and Valve Springs Hi guys Ive gone on a lil bit diffrent road with my new build so i wont be needed these bits. All brand new in the box, only opened for the photos, everything still in plastic wrap. Pistons are 87mm - factory compression. ---------$1050 They Also have the upgraded Grafal Coating on the skirts of each piston. They come with Pins, All the rings, everything is in the kit. And are light as fu*k i never really realized till i got the new CP pistons for my stroker kit and side by side the Mahle are heaaaps lighter. Valve Springs are Tomei Type B ---------- $500 Full kit with the retainers and all, never been opened. Buyer Pays Postage

Hmm your not wrong about those stupid add on boxes, they also drive the price up the of them you have. Im in the market for a new ecu for my new build. I might look into the Emtron

Why the change of ECU? Never heard of a Emtron how do they compare to the elite 2500?

Injectors gone

Filters gone

Open to offers?

KnN filter setup Sold pending payment BUMP

Sard 700 cc forgot to mention that tiny lil bit of info......

700cc

as title says brand new KnN filters only used for 50klm max $220 Buyer Pays Post

straight drop into a GTR rail No need to change plugs or anything just drop em in 500 k old, never ran e85 $400 Buyer pays postage

For Sale Tomei Type A Pon Cams Straight drop in like brand new $600 Buyer Pays Postage

Forsale Tomei Dumps only 500klm done on them, Brand New condition $720 buyer pays postage. Txt Me 0413 199 018

so if that pic a couple pages back in the same as my HKS 100mm than my brand new HKS cooler looks pretty crap on the inside. Ill have to have a look in it.

leak down tester

quote on tyres? I need set soon in the next couple weeks thanks

price for some 265/35/18 posted 2261 cheers mate

spewing im gunna miss another cruise for the 32's, my pour gtr misses out on all the fun. anyone wanner drive it for the day??? kidding : D

cheers mick, the merge into the 4inch is 2 30deg bends notched i basicly drew it on the ground the shape and width i wanted the two pipes to be apart. than eyed em off the pic i drew onto the pipework..... than chop chop. than sqeezed down the 4inch so it was 3inch at the very end and welded it out. when u look up the 4inch into the where the 3 3inch pipes are merging, you can see a straight line right though the bend doesnt really affect the flow...... one way or the other the exhaust is heading in that direction and theres plenty of room for it. also gotta remember as the exhaust cools down it doesnt need as much area. hence 3inch into 4inch i feel is a good combo, the 3inch gives you ground clearance and also heaps of flow in the hot parts of the exhuast. Its also quieter. Mild is quieter than stainless but also a deeper note, so it makes more drowny sounds. Stainless is also lighter than mild, less dense. not that i care to much about the weight, but all in all its not really that heavy for what it is. ill just have to run 1 extra psi of boost to compensate. hahahaha the gold stuff piggaz was about $110 bux from the states for a 600mm x 600mm sheet...... thats 1 full sheet in that pic

this stuff is good enough for the Mclaren F1 team its good enough for me...... #undercoverracecar : D

yea mate, the two v bands are on outlet sides of the "cats". theres only really 4 bends in the hole thing and 2 get used in that merge from twin 3 into 4. Everything eles is lobster backed and holyshit there was alot of cuts. The whole system is no more than 5mm off the floor pan of the car, its as tight up as it can be. So everytime i came across an area i could pick it up a few mm here and there id lobster back it so it all stayed as close as possible...... ground clearance, i like my car low. : D all the pipe work, the 2 normal flanges, and the 4 bends i got off Jez his got contacts the V bands and the 2 "cats" came from summit in the states The mufflers AES all up cost, around $1400 including, tig consumables. 1 bottle of Gas, and Re-flecta Gold heat tape to go on the floor pan where the exhaust runs..... just so i dont any fire issues

its easy man, everyone makes out its some big deal. get onto Tokentools buy yourself a welder. find a speedgas outlet so u can buy your own bottles and not pay rent. set yourself up a good bench that the work peace will earth too. Make sure everything is always clean......... spark her up and lay beads. before you know it, you can tig : D

i took it along the old pac on friday night.......... all i can say is flames flames flames flames flames....... would of looked stupidly awesome from behide.

yea mate, all at my place, its wonderful having a 2 post hoist in your garage........

thanks for the comments to fella's, there was some serious hours put into it.