Sydneykid

Yes, quite normal, I run mine in the top circlip groove. cheers

http://www.skylinesaustralia.com/forums/in...56&hl=Shell

Since it specifically mentions "an engine that has been modified to increase the vehicle’s performance", what happens if you "modify the engine to decrease the vehicle’s performance"? To get it under 125kw/tonne? Simply the converse of this......"the police can actually ask you to get your car checked out by a qualified mechanic if they feel your car is too powerful whilst you're on your P's". cheers

You got it, one in each of the inner joints of the upper controls arms and the traction rods. cheeers

Thanks Tim, I have been concerned during the last week that I haven't had time to respond to PM's. If people take the time to write, then I feel obliged to take the time and respond. In additon, they have trusted me and sent their money to Jamex, I have an obligation there as well. Plus, there is more to this, good things that what will become obvious shortly. Cheers

I have cleared 50 or so PM's this morning, so the inbox has a litte space. You camber kit was delivered on the 30th April, PM sent with details. Cheers

Front = ~240 lbs/inch (4.3 kg/mm) Rear = ~130 lbs/inch (2.3 kg/mm) on the soft rate and ~295 lbs/inch (5.3 kg/mm) on the high rate cheers

The soft rate is ~290lbs/inch The high rate is ~ 870 lbs/inch (15.6 kg/mm) :laughing-smiley-014: :laughing-smiley-014: :laughing-smiley-014: As you can see from the pictures, the "soft" rate is only used to take up space (keep the springs legally trapped at full droop). Hence it is running on the high rate almost all of the time. cheers

Any wonder the ride is "a bit harsh". cheers

Front = 165 lbs/inch (3kg/mm) Rear = 82 lbs/inch (1.5kg/mm) Note that R31's are not comparable with R32/33/34's, they have much different movement and leverage ratios. So the "effective" spring rates (at the tyres) are different. The springs rates are not too bad for road use, and are OK for drag use. So any problems that you are experiencing are more due to the poor shocks that you are currently using. If you are serious about the drag racing, you need some properly valved shocks. Refer to the thread above. This thread is for spring rate calculations, I have cleared my inbox a little, so if you want to carry on this discussion lets take it to PM's. cheers

270 lbs per inch (4.8 kg/mm). Bit too high a rate for drag racing, around 200 lbs/inch (3.6 kg/mm) is my usual choice. The standard springs would be better. Hasemi........Nissan works driver from way back.......they used to use Bilsteins........but not a recognisable part number. Doesn't matter any way, drag shocks need to be unique. Not much bump valving in the rear for rapid squat on launch. With lots of rebound valving to hold the squat. The front is the reverse, not much rebound valving for rapid droop on launch, with lots of bump valving to hold the nose up. cheers

260 lbs /inch (4.6 kg/mm) cheers

The rear bump stops your kit will be shipped Monday (tomorrow), I will let you know the con note number then. cheers

Close, $1240 is the cost (freight is free for orders over $500). cheers

Every car is different. For camber kits this is what is usually needed for each height increment, note that all measurements are centre of wheel to guard; Standard (new) height is 380 mm front and 370 mm rear 360/350 mm needs only the standard rear camber adjusters 350/340 mm needs 1 front camber kit and 1 rear camber kit 340/330 mm needs I front camber kit and 2 rear camber kits Since your 345 mm rear falls in the 2nd group, I would suggest that 1 kit will be enough. Since it is much easier (cheaper) to fit the first kit, they go in the upper arms, I would suggest that you do that first and see what the result is. Fitting a second kit, they go in the uprights (hubs), and so the time (cost) to fit is much higher. cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers

It is most certainly not "normal". Something is worn, loose or broken, so you need to carefully inspect all the suspension components that you didn't replace with the Group Buy kit. Start with anything aftermarket that has spherical bearings, they are the most likely candidate. cheers

Hi guys, my inbox is filling up faster than I can respond to the PM’s. I usually get 30 to 40 PM’s a day. With the current delay in delivery, that has increased to 40 to 50 per day and I just can’t keep up with that sort of volume. Particularly as some of the more technical PM’s take 10 to 15 minutes each to reply to and my available time has decreased dramatically for reasons which will become obvious shortly. I feel that I need to “broadcast” a Group Buy update until I can clear the backlog of PM’s. Here is the current situation; 1. A little back ground first. As you may be aware Redranger and Whiteline merged a couple of months ago. The first step was a merger of Sales, Marketing and Distribution functions and Whiteline’s Minto premises were simply not large enough to accommodate this. So the premises adjacent to Redranger at Somersby were acquired and that was utilised for the larger, merged entity. Some people have taken this as a sign that Redranger “took over” Whiteline, when that is in fact not the case, it is a true merger. The Whiteline manufacturing premises at Minto remain. More news on that shortly. 2. How this affects the Group Buys. Many of the products that I specified for the Group Buy Kits are unique, it is what makes the kits “work” better than any other Skyline suspension update. This uniqueness has been possible because of my knowledge of the systems within Whiteline (plus Bilstein, of course). The Redranger merger has disrupted that system and the “unique” (to the Group Buy) parts have not been flowing through as they had previously. 3. The good news. I have been working 14 hours a day, every day, for the last week, including yesterday (Saturday) helping to clear that backlog of orders. As a result, all of the Group Buy orders should be delivered this week. At this point I can’t tell you what day your individual order will be delivered. But as they flow through the system I will inform you of the con note numbers as soon as they are issued (the normal system). In conclusion, I know you probably don’t care about the reasons, you just want your stuff and that is totally understandable. But I felt I had to give some background and let you know that I am working on clearing the backlog (personally as it happens) so that we can return to our previous prompt responses. Please hang off on the PM’s, I promise you that I haven’t skipped off to Brazil with your money. That your stuff will be delivered very shortly. Cheers PS; the fact that I am posting this at 5.55 am on a Sunday morning should give you some indication of the work load right now.

Soon cheers

PM sent cheers