dori34

hey guys, upgraded to a BM50 so the old BM44 is for sale. in good condition, no leaks etc and to suit cars with ABS. welcome to inspect if local. $90 pick up in sydney, North Ryde during BH, St Johns Park AH can post for extra $10 by registered post. pm if interested. comes with a yellow cap, not black

Yes, brembos are pickup in cabramatta They are off a 98 R33 GTR

Do you have the standard gtr wheels?

Haha they do fit, fronts require abit of imagination to get going though

Few things i no longer need. R33 GTR Brembos, front and rear Comes with calipers, rotors, pads & lines Will not seperate $1650 + shipping Bluddy Club P1 Racing II Plus 18 x 10 +20, 5x114.3 These arent your normal set of P1's they are lighter and have a lip. They come with a tyres at about 80-85% tread left. 265/35/18 $1500 (only pick up in Cabramatta at this stage) Any questions PM me or 0433010130 Cheers

yeah my bank balance says no but i cant help it lol most likely looking at 550cc injectors and 3071R & map sensor for the emanage. we'll see how quick i get bored of this

decided to keep the bar, on the hunt again for fenders

how hard is it to wrap yourself man? did u use a hairdryer to soften the edges to get a clean finish?

Update: 3" dump/front pipes (still with 2.5" cat tho) Profec B Spec 2 14psi 562.4nM 201.2rwkw @ 174KPH

update: 562.4nM 201.2rwkw @ 174KPH. maxed out the injectors & afm. pants test doesnt seem like 200rwkw, i guess it must be all that torque.

but VTEC owns all?

yeah ive been eyeing their motors DaGr81 and its pretty good for that price too! i pumped thru 14.5 psi as i was testing my EBC yesterday and boy it was quick! no traction on 18x10" work rims on 2nd and 3rd which shocked me so i backed off immediately lol

hey guys, the R34 GTR ones wont fit the GTT as the middle of the front bar and hinge support is different. At this stage im going to have to close the group buy as there isn't enough interest at this stage and i will re-open again 1st or 2nd month of 2010 and hopefully get some more interest in them. i will pm all those iinterested in the R34 GTR one next year. thank you for your interest. i have asked the supplier to make some GTT ones but they require a sample first so they can copy in carbon.

might be possible. RB20 are pretty slow on low boost. i raced a r32 gtst, went from 5th to 3rd gear run on a freeway and i beat it with my 34 rb25de lol gl with the sale mate

changed to a 7psi spring & fixed boost creeping problem. used a manual bleeder to set it to 10psi, tihs bleed held 10psi dead FLAT with no spike and it pulled 180rwkw & 499nM of torque. car is going back in next weekend for a EBC tune 10psi (low) 14psi (high) profec B Spec 2. hopefully get some decent torque & power out of this. if its near maxing my injectors & afms then im gonna go for 550cc hiflow + emanage map sensor and piss off the stock afm. ideally i want to run 14psi on high boost but ill let the tuner do it slowly from 11psi and see which is safest without any knocking etc. also got a 3" dump/front & catco cat as well, also removed the silencers from my exhaust so it shouldn;t be as restrictive as before. one problem tho, im running 18" work vskf now so it might weight it down post up results/dyno sheet next weekend. RB TUrbo BITCH at what RPM does it hit full boost?

keen on sume interior bits if you are strpping. MBS206, its a NA i believe.

wise decision adan!

Hey guys, as for R33, i wont be getting them in as S1 & S2 are different and will cause problems. The supplier cant confirm whether its for S1/S2 Guys with R34 GTR, pm if interested. Have them for S15 also. need 5 of each. Cheers

cheers mate mods can close now

na+t or just a na rb25de?

the TD series use a 3 bolt triangle shape flange? the ebay link you posted is for a T3 turbo to fit on a T2x flanged manifold

hey mate, how much you awnt for the catco 3"?

hey jeff is the gate setup on the manifold? willing to sell that on its own? Cheers

keeping the bonnet, dont want a stock bar anymore, nismo option only. thanks