Nabil

All PM's have been sent in regards to the above questions.

pm sent

Im looking at buying a R32 GTR with a blown motor, or one without an engine. Car must not have any rust issues. Cheers, Bill

PM sent - FAT033

Im selling my gt30 if its any use to you. It has 10months warranty on it and its like 2months old Have a look: http://www.skylinesaustralia.com/forums/in...153081&st=0

Pm sent - Trebor

PM sent _ LatinR33

Ok Guys, GARRETT GT3071R 500HP, 0.71 ex. a/r, 0.50 comp. a/r Integral Gated (T3 Flanged). Adjustable 13psi std. actuator. http://www.skylinesaustralia.com/forums/in...gt3071r+project DRIVE IN DRIVE OUT: Supplied and Fitted for: $2800* 10 months warranty from GARRETT That has to be the cheapest turbo GT3071R conversion in Australia. Others are asking much more and they won't supply you with custom teflon braided hoses (cost me $375) (Creatd Motorsports old white Drift R33 made 279RWKW with a smaller version of this turbo.)

all pm's replied

Pm sent

I can't its a kit - sorry

yes

pm sent -rbsilvia

I assume your engine builder has either deliberately or accidently, blueprinted your engine with a lower compression ratio. Possibly made an error in calculating your desired compression ratio. Could be anything from the thickness of the head gasket, pistons used, the amount the head/block was decked etc. This just means your engine will be more less likely to detonate than another engine with a higher comp. ratio. Cheers, Bill

all pm's have been replied to. Thanks

Yes it is and fitting is available in Melb. May neg. a deal with you.

Yes its a kit

good used condition, never bottom out, great handling/drifting, yes they are height adjustable.

ATTENTION ALL PRICES HAVE BEEN SLASHED!!!! Here are some parts I am selling: 1. GARRETT GT3071R 500HP TURBO KIT 1.5months old has 10months warranty from GARRETT exhaust a/r 0.71, compressor cover a/r 0.5.....made 237kw on stock boost on the standard fuel system, (comes with 4inch intake from comp cover to AFM and mates with standard BOV position, teflon braided oil and water lines and custom turbo elbow to cooler piping, adjustable w/g actuator,4inch silicon for comp cover and 2inch silcon for turbo elbow, adapter plate...with lots of reciepts) cost me nearly $4000 $2500* 8. Bosch 040 500hp intank with new fuel lines (ready for direct replacement) 1month old - $200 9. R33 S2 10/97' OEM Fuel Pump - $90 10. 6 SARD 550cc injectors Brand New - $790 11. JVC CD Stacker 12 disc - $100 12. APEX turbo timer - $50 13. Mickey Thompson Street Radials 2 brand new (275/40/R17) - $490 FITTING IS AVAILBALE IN MELBOURNE FOR A NEGOTIABLE PRICE AS A PACKAGE - turbo & injectors- $3000 No stupid offers please.

I have two: 1 Hybrid Intercooler kit brand new in the box 12months warranty - (cooler,piping,hoses,clamps & brackets) 600x300x76 $640 2. Apexi Intercooler 2nd hand but it will bolt up to your factory piping and will sit in the front of your car. 500*300*50 (Don't be fooled by its size it flowed 240rwkw on my R33) $500 If you drive up to Melbourne I'll fit it for free!!! Cheers, Bill

Im currently in the process of building an RB30. I need a RB30 engine manual for more tech. info about specs, torque and angle gauge requirments. Has anyone got it? Thanks in Advance.

It won't prevent R&R as it still runs off the factory ecu. I used to run an safc-I and at cold nights at calder it ran into R&R almost instantly. R&R is there to protect your engine from detonating!!! Power FC is the cure! SAFC is a patch-up!

Price is $1800 in great condition pm me if interested.

Was it after the 92' race? When the race was red-flagged and Jim Richards won the race. Solid evidence only please.

Mick Cita on Ebay sells 040's for $205.45 delivered Oz-wide. Bought mine a month ago off him.