dabigbolf

5 puk brass button. twin plate. like who has 2 grand to blow on one of them..... brass button will be fine. daiken exceddy is what everyone is talking about. i got mine for $550

hey ben, i am going to ring you tonight. need something desperatley. car is cranking over, but need a couple of relays. think you should still have them. catch

empty your fuel tank, change spark plugs, fuel filter, engine oil, coolant, basically go over the whole car. put the fuel is important. i emptied my fuel tank out after 14 months and it was dirtyas.

thanks will look at all the options for that now just relocating fuse box, to give a bit mroe room at the moment.

also run into another problem. power steering setup. The silvia has some some speed sensative unit. and theres 4 lines coming off that, yet theres only 2 spots on the rack. And putting in new lines mite not be viable cost wise at this stage. Just wonderding whether i could take out the power steering lines, pump, put fluid in the power steering rack, so it doesn't run dry, and block off the outlets and inlets, so no fluid can go in or out. only worry would be whether the rack will suffer, or turning will be come impossible. Anyone know what the go is. Is it safe to do? or should i run new lines, but then if i bypass the speed sensative unit, it could cause problems up at high speeds, pretty tight for room with this one. and i got lines going everywhere. thoughts on this please. oh and i got the tank drained, hooked up old fuel pump ran it off a battery and pumped the old fuel out through some hose. worked well.

coool. will look into that one. might be hard to find a s14 one. not that meany crashed ones around.

also note that if you are planning on taking off the flywheel bolts for any reason what so ever, having the gearbox under the car at the same time could result in 12 stitches to the forearm like it did to me. right on the edge of the bellhousing. went you take it off, feel how sharp it is, you'll understand. as for your 2 piece tailshaft, centre bearings can become a problem after time. i got my tailshaft retubed, shortened, and made into a 1 piece for $187. had to do it for mine.

hehe, so do i. how hard is it to put a nipple in the piping?

hey, everything is pretty much sorted. cooler piping, tailshaft, gearbox mount, bonnet shutting, rad, etc. But am just a little unsure on a couple of pretty simple things. 1. have had the plenum refaced, with the throttle body at the front now. However throttle cable doesn't reach. Can it be extended, or do i have to get say a bigger Vl, r32, r33, or other cable. 2. Am not running a bov, so can i just get the rubber hoses which go the bov blocked off at the plenum. The black metal piping which leads to the bov on the turbo side have been taken care of. 3. With the new cooler piping there no place to plug in the vacume line for the wastegate. Can i just extend the line and get the reading off any part of the plenum, or is getting it off the cooler piping on the turbo side essential. 4. for the boost gauge reading, does that just get it off the plenum also. 5. for the vacume lines which go to the throttle body, now that at its at the front, is just getting a bigger line ok, will it effect the throttle body opening, and operating the way it should. 6. whats the best way to drain the fuel tank? any help much appreciated. i will post some pics as soon as i can get a hold of a digi camera. thanks again

hmmmmm........ is on the list......, but not that high....

buy my sheepdog professional bov. brand new never been used. $220. jms sell them second hand for $280. i am not running a bov soooo pleas buy it. hehe

hey, i have an r33 manual crossmember if thats what your after. but with mine i got another one made up. but if u want the crossmember let me know.

still for sale will got for $220

nope. dont think so. its some bov the drifters use in japan. needs to go. bumpity bump

still have it. will accept any reasonable offer. its taking up space. will throw in the driver plate, and torque converter too, aswell as the auto computer. will swap for a good quality boost controller, or anything around the same value. in melb.

r33 turbo rotors for front. $140 for the pair

hey, i paid $250 for it, but will sell for $220. does need to be sold, as not running a bov. cheers. in melb.

hows about timing on your car. good be seriously retarded. but when you say hiflow, more details on what has been done to the turbo. there are hiflows and there are hilfows. T3 with t4 internals. T3 front t4 back. And then just your mild t3 with some porting. but always go back to the same dyno to compare.

if anyone has any info on what it would make on a rb25det, would be great. is it that much of an improvement, or is it really jsut wasting my time. cheers

so not a hi flow. did they say estimated power out put on rb25det. or is it just vg30 ported

shit, just saw your number., i'll give u a buzz

hey, i am very interested. have the cash. its just a matter of knowing how much benefit, over the stock r33 series 1 turbo this is. what power would it be making on say 14 psi. and can i use the r33 dump pipe. what is involved installing it. cosider it sold, i;d liek to ring u though. could u pm me your number

hey, i'd like to sell my brand new sheepdog bov. i have it for a while, but not putting it on anymore. i will sell it for $230 firm. or swap it for a dual stage turbosmart boost controller plus cash adjustment. located in melb. cheers p.s would prefer to sell, but if need be will swap.

hey, rb25 in a silvia. using r32 crossmember, silvia power steering rack, and rb25 power steering pump problem is theres a speed sensative sender unit that doesn't fit anymore, space doesn't allow. can i just rip it out. or do i have to get a r32 power steering rack. how does everyone who do these conversions go about it. and temporaily, can i run the car with out power steering, if need be. need help, as its a big mess. more pics will come. but wondering if anybody knows.

hey, now this is very urgent. need a flange to connect stock dump pipe to a front pipe i have getting made up. i figure post here in the vic section, cause i am from vic. anyone who has one around, i really do need one. sort of holding me back. cheers