CRZY32

I have a tonne of these! Still in boxes, unopened and original condition. Mostly R32 race cars... Will send you an email. Peter

I have a nice clean late model R32. Restored and resprayed. Complied and rego but built for the track. 0408342613

Entered and paid Better not rain!

Hi guys Just need the 2 plastic strips that sit on the L+R outer sides of the front windscreen. Any R32 version will do.. New or good condition. Thanks! Pete - 0423 076 057

I plan to be there Sunday

RHDJapan for about $320

Totally agree. Only wish I knew about it earlier!

Yes my 4WD is working like a dream now. Fitted the new nitrogen canister and bought a digital G-sensor to replace the old original sensor... Car hooks up all four wheels almost instantly on the track! No tail happy over steering with delayed torque split anymore. Next I will rebuild the transfer case to ensure best possible mechanical engagement.

SOLD

Still available

I want these sold before Thursday 16th... Please call or SMS your offers Pete - 0423 076 057

For sale: 2 new Sparco Evo II seats with fixed side mounts... Bought them new and trial fitted a couple of times only. Selling as I've decided I want seats with head restraints instead. Both seats come with aluminium mounts that have been modified to allow straight mounting (Sparco seats taper in). Also included are all bolts and spare alloy spacers for fitting. These are sexy looking seats that offer great support at an affordable price! $1750 ono. Pick up from Melbourne or arrange your own courier. Youtube review - Photos coming shortly!

Guys, I need the interior body wiring loom for a late model R32 GTR. The harness includes the small fusebox that sits under the dash near the driver. It extends under the dash and carpet then all the way to the boot. It powers the cluster, aircon/heater, centre gauges, gsensor, attessa ECU, etc. If you have one, please PM or SMS... Thanks Pete 0423 076 057

Do you have any body wiring looms for an R32 GTR? It's the loom that connects from the driver side kick panel to the rear of the car...

I've just ordered a new Attessa accumulator from RHD for $320 delivered. Problem is that I really don't know if I have a faulty pump or empty accumulator

xntrq - tried sending a PM but you cant receive any more messages... Did you say that you have new R32/33/34 Attessa pump accumulators for sale? Can you please provide a price delivered to South Melbourne 3205?

Anyone know of any shop that has stock in AU? This nitrogen filled canister screws into the 4WD hydraulic pump that sits above the rear diff in R32/33/34 GTR's...

Haven't tried, but makes complete sense to do so. Any advice on where I can get a new nitrogen canister? Thanks for the response!

Ravi - if you are replying to my comments I have a new battery and new cabling, solid connection. An auto elec also tested the entire Attessa circuit and all powers up fine. Summary of my issue: - 4WD and ABS lights stay on constantly - Attessa computer reporting Error code 18: “ETS pressure switch or circuit fault” - Auto elec checked all circuits and wiring thoroughly, all is ok - 4WD pump primes on initial startup but no pressure going through lines to gearbox - When pump is forced to prime (sending power direct to pressure switch) no fluid is coming to gearbox Might have to bite the bullet and replace the pump!

Just wondering if you guys resolved this problem? I have an R32 GTR with error code 18. Tested the circuit as per the workshop manual and it's all good. However 4WD light stays on permanently and attessa pump only primes rarely on startup. Any input from other people's experiences would be appreciated before I begin to change pressure switches and pumps out of desperation!

Can anyone confirm if these are for an R32?

NEEDED URGENTLY R32 door window stoppers / brackets. 2 per door, so need 4 in total. As shown in pic below.. Located in Melbourne. Will pickup if in VIC. Cheers Pete - 0423 076 057

Sold

Rear bar in silver - good condition - $150