SmItZ

Thanks! Interior is very clean, especially compared with other 32s around! Original floor mats are also included, I just removed them prior to taking pictures. Kick panel is probably sitting at my tuners workshop...I can pick it up or source another no probs. Very revvvy motor!! Limiter is currently set at 8500rpm, although 9000rpm is no problem. I was waiting till I got a large capacity sump before dialling in 9k. Intank 040 and external 044 have no problem supplying the required fuel...though as you suggested, they are probably at the max. I'm unsure of the fuel pressure to be honest. Hahaha I knew someone was going to pick up on that. To cut a long story short, it was a gift from Dai-Chan (Manager and Tuner at Cruise) who happens to have a RH9 R33GTR.

Cruise Power R32 as featured in Performance Imports and Perth Street Car Magazines. Car is an absolute MONSTER and not for the faint hearted! It currently makes 550hp @ 1.8bar, although more timing and boost will see close to 580-600hp. The car is in excellent condition and meticulously maintained. As much as I hate to sell it; I'm starting a new project so unfortunately this must go. I am willing to remove some parts to lower the price if need be, but please bear in mind everything on this car is genuine Jap (excl. 6Boost and Vi-PEC of course) NO Cheap China $h1t!!! Call or PM for more information. Interstate buyers, I'm more than happy to assist with shipping if required. Price: $22,000 ono Location: Perth, Western Australia Contact: PM or 0410 656 646 Engine: RB24 Stroker (RB20 stroked to 2.4litres) Block Acid-dipped Block Bored and Honed Tomei 82mm Forged Pistons Fully Prepped GTR Crank Fully Prepped GTR Rods Tomei Oil Pump GTR N1 Water Pump TRUST 16 Row Oil Cooler Heavily Ported and Polished Head Tomei Metal Head Gasket Tomei Valve Springs ARP Head Studs JUN 272 In/Ex Camshafts JUN Adjustable Cam Gears Custom 6Boost Hi Mount Exhaust Manifold Blitz K5-660R Turbo Cruise 3inch Front Pipe TRUST TR 94mm (3.75inch) Drag Exhaust HKS 50mm External Wastegate with Screamer Pipe HKS Super Power Flow Air Filter TRUST 4-layer Drag Intercooler with Custom Piping GReddy Intake Manifold Cruise 90mm Throttlebody GReddy Fuel Rail SARD 720cc Injectors SARD Fuel Pressure Regulator Bosch 044 External Fuel Pump Vi-PEC ECU HKS Twin-Power Ignition Amplifier GReddy Timing Belt Cruise Oil Catch Can Braided Return Lines Battery Relocated to Boot Yashio Factory Copper Radiator Drivetrain: 5 Spd Gearbox w/ OS-Giken Close Ratio Gearset OS-Giken Twin Plate Clutch 4.3 way GTR Diff GTR Hubs GTR Axles Brakes/Suspension: HKS Hipermax Drag Coilovers KTS Front Camber Arms Kazama Front Castor Rods Kazama Rear Camber Arms Ikeya Formula Rear Lower Control Arms KSP Attain HICAS Lockout Bar Wheels/Tires: 17x9.5 +17 Advan RG all around (Achilles ATR Sport 215/45/17 Stretched Tyres) *Car will come with 16" Nissan stockies, although these can included depending on price Bodywork: GTR N1 Front Bar with Custom Perspex Duct Blockers M-Spec Side Skirts M-Spec Rear Pods Deleted Rear Spoiler Deleted Rear Boot Hole Tomei Rear Tail Light Covers Interior: Auto Meter Ultra Lite Tacho HKS EVC VI Boost Controller Custom Carbon Fibre Centre Console Gauge Holder Custom Carbon Fibre Glove Box MP3 and A/C Holder Radio/MP3 Player relocated to Glove Box Defi BF Boost Gauge Defi BF Oil Pressure Gauge Defi BF Oil Temperature Gauge Defi BF Water Temperature Gauge Defi BF Exhaust Temperature Gauge Defi BF Fuel Pressure Gauge Sony Xplod MP3 Player Cruise Gearknob Do-Luck Rear Tension Cage/Bar

Thanks. Just as he said

BUMP

Thanks mate! Good to see someone else appreciate how rare this is....let alone brand new, in the box with the instruction manuals. I should've put it up for a bit more then

BRAND NEW HKS Electronic Torque Split Controller (HKS ETC) and HKS Electronic Drag Adaptor (HKS EDA) for BNR32 / R32 GTR. VERY RARE! Now Discontinued. A must for all those wanting to achieve good 60ft times and 1/4 Mile times for their Drag GTRs! The HKS Electronic Torque Split Controller (HKS ETC) allows you to lock the hydraulic ram mechanism at different extended lengths in the transfer case to go all the way from locked 50/50 f/r split, to 0/100 f/r split with several in-between adjustments. The HKS Electronic Drag Adaptor (HKS EDA) interfaces with the ETC and adds a speed limiter function in so that you can run a certain lock 50/50, 60/40, 70/30, etc... and then when you hit a certain speed it switches it to full RWD mode so that you have less drivetrain loss and more power to the rear wheels for drag racing. Located in WA, but will ship at buyers expense $1000

SOLD

Ian, I could but I don't think shipping would be that cheap from here. Send me a PM if you're serious and I can get a quote.

These are the only oil coolers that sit behind the grill, unless you want to custom make your own.

Nothing wrong with Nismo coolers, but if you want something unique and visible in the engine bay...these are the way to go.

PM replied Clearing out my shed, this was off my previous 32.

Sorry, that would be helpful. 1st post updated

ARC Grill Oil Cooler for BNR32 GTR Sits behind factory grill or replaces it all together Will also suit R32 GTS-T with GTR Bonnet and/or Grill Good condition Does not come with grill pictured, however, includes braided hoses and fittings $500ono Located in Perth, but will ship at buyers expense

HKS 4in Catback Exhaust for BNR32 GTR Stainless Steel w/ Titanium Muffler Very loud and free flowing exhaust for anyone looking to make big power Used in good condition $500ono Located in Perth but will ship at buyers expense.

PM sent

Price Drop $550

All-Star sell 20 gallon drums

Now in Australia, awaiting Aaron and the team to unpack the container.

Hi, More of an expression of interest as the item is still on it's way from Japan (via Import Monster. This can be confirmed with Aaron for anyone whose skeptical). Took me a while to find a nice, big bore, drag exhaust for my car. As it turns out, I've had a change of heart and now want to go side exhaust. I know there's more than a few owners on here who are looking for a 4in (100mm system), so here's your chance. Item: 4in Stainless Steel Exhaust (Cat back, No resonator or De-cat pipe. This thing will be LOUD). Titanium Muffler *Few scratches and scrapes, but nothing that will affect performance. **Should be in Melbourne in the next 4-5 weeks. $900

VERY nice! The tubbed one looks like a 32 we had in town (WA).

FAB Car from what I heard

HKS Electronic Torque Split Controller (ETC) for BNR32 (I believe this will fit BCNR33 as well) Used Good Condition Complete with all wiring (inc. ETC module) $550ono shipped *I can email pics for interested parties but we all know what one looks like.

YESSS!!! Will do. Thank you

Looking for BNR34 GTR OEM: 1. Front Diffuser, Lip and Stone Tray 2. Rear Diffuser PM me price and pics. Thanks

Hi, Does anyone know if a BNR34 Factory Rear diffuser will fit onto BNR32? I don't like the look of the after market diffusers and was thinking of getting a BNR34 instead. Thanks