The Bogan

Wasnt the Viper styled on the MX 5 but with 5 times the power and less 5 times the handling ?

For what it is it doesnt look to bad to me, leave a note on the window and you may well end up with a bargain. Or you could give it to me.

Put up a price as per forum rules or youll have the thread locked mate.

Nice attitude mate. Set the ride height so your happy with it, mine sits at about 355 front and 350 rear, it handles great and I can drive over most speed humps, it also handles better at the track because the geometry is better than when it was lower, my track rims are 17x9 +30 with 265/40 R compound tyres, fronts fit well but the rear need at least 1.5 deg negitive camber to clear the guard when the spring compresses. Only problem I have is at full lock the tyre just touches the whiteline sway bar up front. To overcome the tyre hitting the inner guards all you need to do is use a heat gun to soften the plastic then you can use something like a cricket ball as a tool to create some more room by rubbing it against the softened plastic. Marks 2 cents.

Its in melbourne and he still has it. Someone want to go get it for me ?

I PMed him about location a couple of days ago but haven't got a reply. I want the wing if its in SYDNEY

I cannot do J turns with ABS pluged in in my 33, I may just be crap but my old MR2 (AW11 non ABS) loved them. And I like the felling of gassing it to the entry of a corner and then mashing the brakes without fear of my crapness flat spoting my $500 tyres which acording to my budget must last 1 year.

Sarcasm, I like sarcasm. G,day mate, sorry for the lack of replies, pop in on any of our events for a look see, you dont need a skyline to be here, although it does make you more hip if you do, lots of events coming up next year from track days to motakhanas (TEXI) in which you can use the daily for some fun (throw the better half in the daily and take her for a blast). Bring the family along for some LOLs at Texi as its a ball for all ages and there are other women and kids to keep the flock happy whilst you check out the skids. Hope the toyota project is coming along well, I know its hard as Im in the same boat with a missus a EX and 3 kids that eat into my car budget, but bit by bit it eventually comes together. Mark.

S1 FTW

If money was no object I would go one of these, my choice is -#3. 2010 Dodge Viper (600 hp) http://www.autobytel.com/content/research/top10/index.cfm/action/highhorsepower/page/3/listtype/9/vehicleclass/sprt The skids would be epic On a serious note what have you got planned for the car, drag-circuit-dyno queen or just a streeter, only reason Im asking is a 2.6-3 ltr making that much power would be quite the lag monster unless you dont plan on letting it get below 5000 rpm, I would assume, if its a streeter with rego.

Also watch out for water that gets into the valley where the coils are as the plugs will rust and the moisture will work its way into the boots and cause a missfire, it happened to me.

You will need to join SAU NSW branch of all things awsome.

Raising the rear of the bonnet will vent hot air when you are stopped, BUT, when you are driving it is a high pressure zone which will cause the engine compartment to pressurise which will affect the cooling as the air going through the radiator will have trouble passing through. Read this link for what Im talking about..... http://www.autospeed.com/cms/A_2162/article.html

My engineering cert cost $990, best money I ever spent, covered everything which is not stock, which is nearly everything. Only had to fix a few things like remove turbo timer, plumb in catch can.

The pod will suck hot air from the engine bay which wont help at all, box in your pod with a cold air intake (CAI) or replace the standard air box and use a good filter, if the stock air box doesnt have a CAI then modify so it does or find a replacement one that does. The wreckers are your friend with 11ty million different air boxs which would suit your NA. http://www.autospeed.com/cms/A_0073/article.html http://www.autospeed.com/cms/A_110281/article.html

FYI @15lb 2.5 cat is holding it back, with a better sized exhaust it should hold the torque better Ive been told, 3.5 inch from dump back will be coming over the next few days. Thanks for all the info guys.

http://www.rockdalenissan.com.au/news/latest/spare-parts-accessories.html

Needs more RWD boats IMO. GTRs are OK I suppose.

Im not sure if its the same story but I swapped out my whole rear cradle for a GTR one, mines a R33 GTS-T though. Much better hook up, no more open wheeling, and the axles/half shafts are bigger as well. The whole swap cost less than a new aftermarket center. Mark PS RWDFTW

Must be in Sydney. Only need wing but will concider boot lid as well if price is right. Prefer silver but any color will do. Please PM me.

New $50.00, Bargain Happy NSW members price = 1 x 6 pack of JB & Cola Pick up only

Have paid, do want, well at least I wants before 01/01/11, Ive got it on good authority that the world ends on 01/01/11 and it would be nice to go out with a bang knowing that Im organised.

Great night guys and girls, Now we all know why he is called "Gentleman" Jim Richards http://www.facebook....gid=37362666227 And as you can see from the photo we had to advert or eyes or be blinded by pure awsomeness

Ive never had problems with the law, that was a typical uneducated assumption matey, unfortunally Ive spent more time expaining my actions than I care to admit, but, I have accepted my punishment which has been deamed fitting, learned from it and moved on. I hope you never have someone take the life of someone you love and get off scott free because of some loop hole in the law. Doing wrong is doing wrong, accept what youve done, take your punishment like a adult and learn from it, you will be a better person. Also forgive my spelling, Ive never been big on that side of things.