adam999111

AFM plug and pod filter adaptor SOLD

They are just The friction plates as I've stated in original post. Here are some pics of exactly what you get.

Pics of both sets of wheels as requested by various people.

For all the people asking for info about the wheels. Please state whether you want info on the gtt wheels or gtr wheels. Cheers

The pod adaptor is plastic with a rubber gasket.unfortunately I only have a brand new bosch plug for a z32 not the actual AFM.

Hey, they are both 34 wheels. The gtr wheels don't have semis they are Chinese Tyres, the gtt wheels have re55 I believe but they don't have much tread left.

PARTS FOR SALE. Location MacLeod Call or msg O42two334013 I have pics of all parts just msg me. Some Prices are negotiable -R34 gtr wheels 18x9 +30. Powdercoated black, With Tyres 2 with 65%+ 2 just above indicators $1300 -R34 gtt wheels 17x7.5 +40 with 235/45 semis $200 (one TYRE has a very slow leak) -Standard r33 AFM $20 -Standard R33 injectors some of the plastics is chipped when removing them $20 -NEW Pod filter adaptor to suit r33 AFM $10 -Twin plate ORC clutch friction plates 4.41mm thick - unsure of price make an offer -NEW Drift panel filter for r33, commodore or some Subaru's. $20 -NEW Z32 AFM plug $10 -R33 rb25det manual ECU $50 -2x bare semi slicks no rims 235/45/r17 $20 -Standard Camber and traction arms r33 $30

Stao visit, www.asapwebsites.com.au its a mate of mine who runs it. We came in on Saturday for a temporary chra. And give him a call. He should look after you

Yeh mate, brand new.

BUMP

Here is a picture

Have a spare set of OEM r33 s2 rb25det coil packs for sale. Will possibly fit r34 gtr but unsure. will not fit s1 rb25det as These have the ignitors built in. $350 +$20 postage Pickup welcome Call or msg on o42two334o13 with any questions Located in MILL PARK 3082

As stated in title i want a r33 series 2 bonnet in KR4 silver, if its not in silver it better be cheap as chips so i can get it painted. Might also want fog light covers for r33 series 2 Call or Message me 0422334013 want bonnet to be in Victoria

Just the reassurance I wanted. Thanks. It's close to touching the housing but it doesn't.

Measured with a vernier as good as I could with the turbo on the car. There will obviously be a bit of error

I would like to know what peoples opinions are on how much shaft play is normal for a turbo to have? Mine is about 1-1.5 mm total. It just feels like a lot more than what it should have. I have a SS2 with 0.82 rear. The car is also driven hard all the time. But does get good warm ups and cool downs

yeh sorry i keep forgetting i have ext gate and t_revz is internal, but he will still see gains non the less without at cat.

My dyno sheet is on page 292. that power and psi i stated was actually at 6200ish rather than 6000, mind you its did make just over 290 before some timing was backed off. Based on the laws off physics.. In an Ideal world nothing after the dump on the turbo, will obtain the best results performance wise. any restriction in the exhaust is going to result in power loss, thats inarguable, its just when the gains don't become significant enough to worry about. Please dont get hung up on numbers, it might not be exactly 20kw... As with your exhuast, it must be a good free flowing one

I got 280kw at 16psi at 6000rpm. I had no cat. If im correct u had a cat in ur exhaust system?.....Get rid of the cat and I can almost guarantee you will see around 20rwkw gain and response gain as there is less back pressure on exhaust wheel.

D1R's are SOLD!!! the enkies are still for sale tho

‎4x D1R 2x 17x9 +17 225/45 2x 17x10 +15 235/45 $850 front tyres have roadworthy tread depth, rears are not roadworthy tread depth. few things to mention... they have a few MINOR scratches here and there, and the 10inch wheels have some scratches around the wheel nut area, 9 inch wheels have different tread pattern tyres and one of the of 9inch wheels has some gutter rash, i can send a MMS of the defects if you give me your number. Located Bundoora... 0422334013 ______________________________________________________________________________________________________ 2 x Enkie RP03 18x9.5 +38 $400 pretty good condition they have 265/35 tyres good for skids, different pattern tyres on each and different tread depth on each, 1 probably isn't roadworthy condition

Copper washer. On the non tapered side. Haven't had 1 drop of oil come out.

I believe stao was running around 20-22psi hence the power difference. And I was running. 18 down to 16psi. Mind you Im running straight off The waste gate with no boost controller at all. Stao was right External gate makes a huge difference in power figures. I think my car could make 300-320 on 18 psi (at 6000rpm) considering. It made around 290 on 16psi (6000rpm)

Just did a winton drift practice day and may i say, the turbo ran really well, not one problem and is the perfect amount of power for third gears slides, car did not loose one bit of power thrashing it all day and was very consistent. Had to learn to keep the revs up but once they were up, i was like furk me this is good.

I didn't get a printout for the 295kw run, but if i remember correctly it wasn't much difference. It was between 180-190kw.