Skyzza

Silver r34 gtr on princes hwy going past dandenong high school about 5pm

The 1st pic the one with the gauges in the glove box. As I have been looking for 1 to fit that hole, all the ones I have seen are to big.

Hay Leon what tablet did you use in the factory screen Thanks in advance

All I did was cut and extended the wires, to a micro switch mounted on a bracket at the shifter, when the car is in park the switch is closed. As we all know that you need to put the brake on to take it out of park, that way it resets every time I drive it and dont need to worry about it.

i just went to the site and the message i get 'Sorry but this board is currently unavailable'

Just seen black m35 going down Abbotts rd dandenong I did wave.

Like everyone is saying if you don't draw attention like spending or racing at lights cops look the other way in dandenong. I have lived and worked in dandenong for the last 10years, with a R33 that had 3"straight exhaust with cannon, and the only time I ever got pulled over was doing something stupid.

Hi buddy I have not had my stag for long, but had a r33 for 10years and only ran premium fuel as I was under impression that we had the lower octane level.

Good to hear you got it back looks like not much damage done to the outside (what i could see) which is good

Pm sent

Saw a white c34 looked to be Autech 260 on Gladstone rd yesterday near Bunnings

Spotted White S2 Westfield Fountain Gate about 2pm

Thanks anyway Scott It's probably a long shot do you still have cargo blind i did see you talking about it a few pages back

Hay man do you still have fuel flap motor still Thanks Gary

HI It sounds like the problem i had then it would do it anytime. it was air flow meter in the end.

thanks guys how will get the trim off with the door while, its still closed dont realy wont to cut the trim. its a pain geting in, feels like i am a nascar driver :wassup:

HELP The other day i unlock the car, and was not able to open the door. I have tryed from the inside as well cant get in or out. Its just like its still locked, but you can hear the lock moving. any help will be good thanks

i found the problem on my heater fan. if you pull the glove box out, you will see a plug with 2 or three wires dead central to the opening you just created. there will also be two screws holding a mudule that is attached to the plug. this module controls the fan speed using a complicated circuit board, i got a second one and put it in works 100% now

thay recon that my gas it fine but the compreser has pack up

i had both my gt badges and the s off the front and the nissan from the back of my 33 it was out the front off my house only a meter away from mums window about 3 years a go still trying to get the nissan badge also the side ones have slots in the gards

thanks for that i did the bearing on the aircon side so i change them all now i need to get the aircon re-gassed thanks again

can any one help me i am after the numbers of the belts for a rb25 eg.fan,aircon,etc thanks skyzza

dont matter now i found it

still can't find the problem so i mite pay someone to fix it