mittons

Yes, absolutely correct. My bad misread.. Tomei PROCAMS INTAKE 1421280108 EXHAUST 1422280108 Price to be adjusted shortly

So many PM's offering $200 for the cams, low balling is no fun. It seems that they retail around 740 from o'seas. $450 is a fair price if anyone interested.

Hi yall, cleaning up my brothers shed in VIC at moment, found what appears to be a brand new set of Tomei Poncams. Part numbers as below; 1421280108, RB26 Intake 280' - 10.8mm 1422280108, RB26 Exhaust 280' - 10.8mm Unsure what they're worth, I should be bringing them back to Sydney on Monday if anyone interested or wish to inspect. Any offers?

Car is no longer for sale, mods pls close thread.

New silica front tyres, Accelera or something like that. Has vastly improved the wet weather driving, noted the old front tyres were mismatched tread pattern. Eyeing off a set of 480cc inj, and a Power FC.. Someone buy this car to stop me spending more money! BUMP!

cheers for the PM, where abouts would pick up be ? consider it sold bud.

Will the S2 nistune fit the series 1 and retain VCT ? Would be happy to pay and pick up if so.

No probs bud. cheers!

location ?

Can this boost controller be safely used for a single turbo application ? obviously being installed on a GTR it has the twin solenoid..

Replied bud!

Replied. For anyone interested, I'm not desperate to sell. I just would like to get a car that I'd feel much safer having my daughter be driven in. This does not mean I will sell it for 6k or other low offers. The car is ridiculous to drive in the wet weather, even with 265's on the rear.

BUMPO! I'm still here.. Buy me, buy me now

Chasing where and if anyone knows where to find the rubber insert grommets for the top radiator mounts for an R33 ? I only need the rubber inserts, as mine are slowly failing. As I am trying to sell it, I would like it complete!

sorry to hijack does anyone have part numbers for either of the sensors ? I suspect mine are a little flaky!

Due to a pest of a person forever promising he is *approved* for his personal loan and a complete tool, I would like to part ways with my R33 more now. Looking around the market, I would say price drop to $7,500 ono might be more fitting ?

No probs, on night shift this week due to the M5 closure but will call when can

Even better, i work in arncliffe so i can meet you sometime if suitsble ?

Even better, i work in arncliffe so i can meet you sometime if suitsble ?

Are you interested in a swap for an R33 ? I have a for sale ad here also. Looking for a practical car for a baby seat for my daughter

enjoying the troll food. r33 5 spd, sits around 3k at 110km/hr in general. assume diff gears are 4.11 for manual, 4.3 for autos so may be slightly higher

82 views and no questions or comments yet ? Come on people, the worst I can do is say no to an offer! Not desperate, but would like my daughter in a more accommodating vehicle..

Hi all, Due to circumstances (newborn daughter), I would like to sell my R33. R33, RB25DET 5 spd. Dark grey or charcoal in colour. Paint has some clear coat peeling, but otherwise pretty good. I have owned this car since roughly August, and have carried out below repairs/mods; - Installed Mongoose M80 series alarm with the built in timer - Replaced the apparently new Yellow jackets with Spitfires and a new OEM connector loom - Repaired the shitty job on rolling the rear guards, was starting to catch on the tires when going over bumps - Now has Hypergear ATR43SS2 billet turbo with braided lines.Has approx 100km on install - Replaced the rubbish led conversion installed in the dash and AC and boost gauge, much better angles and visual light - Replaced brake light globes and HID ballasts and globes due to failure - Walbro GSS342 installed into tank correctly, was loose in cradle - Tightened BOV and check all hose work - Cleaned AACV to improve idle - Fixed AC, now works properly - Installed rear strut brace - New battery when purchased - New clutch when purchased - Just re-registered 6 months, as who wants to have to do it at Xmas Also has a Kenwood DDX-4038BT with a new usb to ipod/iphone/aux cable. Runs front 6" and tweeters, and rear 6x9". It also has the wiring for an amp/sub in boot. Has Starcorp Impul (with free gutter rash) 18" wheels, the rear a deep dish and run Kumho Ecsta 265/35/18 I think. Front are whatever yum cha tires fitted by previous owner(s). Has a HDi front mount, Apexi pod and new MAF, seems to be a large new radiator, never shows hints of overheating on M5 peak afternoon traffic. Car has only been worked on by JEM since I have owned it, it first went in for an inspection and fault finding (was hitting R&R). Turns out previous owner must have been running a piggyback comp and boost tee set at 15psi. Due to fault on car, I didn't allow it to boost until rectified. Car does not get thrashed or abused, I only work up the M5 in Arncliffe so it barely gets to do the speed limit. Car is usually garaged, and washed occasionally. It has since gone in for the turbo changeover, and received a service on diff and gearbox. Turbo was replaced due to a slight bit of oil dropping into front pipe, not failure. All old parts will go with the car at sale as I would not need them if sold. On the dyno it made 213rwkw with its minimal modifications. Spoken to Dean at JEM, he implies with a Nistune or Power FC (or Haltech Platinum Pro) it should sneak into the 250rwkw mark easily with a tune. Unsure about the compression, but motor is strong and healthy. Unsure how to upload happy snaps or dyno sheet, but can send by email or phone if requested. Located in Campbelltown area, can be viewed in Arncliffe when at work. Looking for around 9000ono, or swap for a car more suited to a baby seat, maybe VX SS upwards ? Thanks for looking. EDIT * Car has approx 122 thou km, also has tow gear fitted

DC33VN, I have a 45V1 and a 45V4. The 45V1 was just removed from my series 1 to install a Hypergear replacement, and the 45V4 I purchased previously as a possible replacement. Welcome to have a look at either, I am located around Campbelltown area.

Series 1 Hypergear ss1 3" exhaust fmic walbro 342 otherwise stock Dynoed 213rwkw Next step is a comp, then maybe aim for 250rwkw as daily driver