Jump to content
SAU Community

Recommended Posts

hey fellas, just a quick question. im buying a r33 gtr spoiler for my r33 gtst, do they all fit straight on? and also its missing the whole brake light assembly and wiring is it possible to take it off my series two spoiler and do a swap? if not how much would it cost for the brake light assembly and wiring? thanks

Link to comment
https://www.sau.com.au/forums/topic/100036-just-a-quick-question/
Share on other sites

Yes the spoiler will fit,

As for the rear led lights, i dont know whether the gtr and gtst lights are the same length/size. IF they are it would be simple, you could figure it out yourself, just basically swap the light from your old spoiler to the gtr spoiler.

IF they are not the same size though then you'll prolly have to source a gtr one from somwhere

Well, personally I look at http://www.ebay.com.au, but it's not that good in some cases. If you look at ebay international you may be able to find it more easier... with a larger shipping cost and wait, of course. But it's your choice, really. I don't know of any stores that you could go to for GT-R stuff. That's a nice car by the way. :P

Edited by LuzTeTT

they are 1000 brand new and about half for secondhand and you need to make 3 hole in the boot lid arross the back for some studs to poke throught and i think you have to oval out 1 hole per side. and wiring is the same length and clicks togeather

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...