Jump to content
SAU Community

Recommended Posts

I forsee 20 posts all with different opinions. Motul will no doubt be mentioned etc.

My thoughts are if its good quality oil, its changed regularly, and its not cooked with sustained high temp use, then you are ok. I use to love the Mobil 1, but the viscosity i use to use in Sydney isnt available in Vic, so i now use Castrol R 10w-60.

Just keep in mind his car is an NA V8, so the oil isnt likely to see the revs and heat that your GTR will, so wouldnt try and get the same life out of the oil as he would in the Porsche

M1 EP is a very good oil as it contains roughly 30% more detergents and antiwear additives compared to the regular M1 formulation. I would recommend it over the Castrol R with no hesitation. And there simply would be no point changing it out any earlier than 10,000kms (as its rated to last 15,000 miles!) IMO the 10W-60 is too thick. It belongs in a smoke blowing sigma.

If its an improvement over regular M1 then great. My old RB20 bottom end is in great nic, and the head was very clean as well after 160,000kms. so the oil is certainly good at cleaning, lubriocating and cooling an engine that saw plenty of track use with no oil cooler.

I seem to recall reading somewhere that the M1 was also one of the mroe stable high temop oils...but to say the Castrol R is too thick...well again my temps get pretty high when im at the track, especially considering im making 130% more power then std with tstock coolign / oiling...so the extra viscosity is insurance in my eyes, and hopefully will help the bottom end hold together.

Again horses for courses, and not disagreeing with you regarding Mobil1, but i would still be a little reluctant to keep any oil for 10,000kms especially if the GTR is driven hard whenever its taken out, and struggles to cover 10,000kms in less then 6 months...

Like i said, just some thinking, not really disagreeing :P

No problems Roy. Everyone is entitled to their own opinion. I too would run Castrol R 10W60 if the car is used regulary on the track, to counteract the thinning of the oil as the oil temp soars. But if the temps are regularly over 130C, I would recommend an oil cooler :P

As for 10,000ks, the best thing to do is an oil analysis. That way monitoring aspects such as fuel dilution, wear metals and TBN can truely give you an indication of how long an oil can stay in an engine. Again, if the car is track driven, 10,000ks is too much as it would be loaded with soot from blowby and fuel diluents (from rich running).

For a pure street car, 10,000ks on M1 should be no problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...