Jump to content
SAU Community

Recommended Posts

I want to put a turbo kit on my R32 GTR and i want a response car. so if any one can steer me in the right direction that would be great. my r32 is basicly stock has a exhaust. so any other parts that might help me with making a response car please tell

Link to comment
https://www.sau.com.au/forums/topic/100875-gtr-turbo-kit-help/
Share on other sites

how responsive are they. what is the rpms a soon as full boost comes on?

http://www.skylinesaustralia.com/forums/in...p?act=Search&f=

cheers.

Its all covered, depends on your engine spec.

Have a read of the threads.

Same thing for 2530's

GTR Garrett 350HP Upgrades

707160-5

pnblight uses them in WA and makes 500+rwhp with supporting mods

They bolt up to all the standard oil and water lines as well as dump pipes

several customers have pointed out, that they see a difference of 3-500rpm

Thanks

Tarek

RACESPEC

this is not the for sale section, traders can use thier own sections freely, not FI

cheers - R31Nismoid

I want to put a turbo kit on my R32 GTR and i want a response car. so if any one can steer me in the right direction that would be great. my r32 is basicly stock has a exhaust. so any other parts that might help me with making a response car please tell

the best two units are

Garret gt2560r 707160-5

Hks 2530

I personally not very interested in the gt-ss as you loss top end with no real gains in the bottom end over the 2530 or gt2560r (personal opinion )

both direct bolt on and both very similar, if i had to pick the differences the garret will spool a little earlier and make a little more hp at lower boost BUT the HKS is capable of high boost and comes in to it own in this area but these not a lot of motors that will run 1.5 bar plus which is where i believe the HKS start to over come the garrets

Racespec can supply the garret at a very good $$ much cheaper thean the hks unit new out of japan (comparing new with new)

I have run the garret turbos through all the stages of my build up from std with exhaust 12.08 1/4 miles (std air box ,injectors,afms, ecu ) to 529.4rwhp at 20 psi

pete

2530's mate...i made over 440AWKW on race fuel and over 400AWKW on pump gas also made 467RWKW on 103unleaded....runs 10.3's and goes like a rocket off the mark..1.4-1.5 60' times...i might have a set for sale if you are interested...pm me

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...