Jump to content
SAU Community

Recommended Posts

blackr - never said it wasn't, in fact I said it's either a type b or c. 

what I was saying was that the spirit-r (the type a, to be precise) is simply an RZ rx7 (of which 175 were made in that particular production run), with a few aesthetic add-ons - so it's not so much 'rarity' that's a factor (though 1500 is a relatively small run), but the fact that it's a 'last of the line' version.  Given that an RS (which has most of the RZ goodies) is lineball in terms of performance - it's probably the better buy (unless you are cashed up and don't care).  HOWEVER, there is the question of resale - and who knows if people in the future will care about the spirit-r/rz or not (though in the short term, it would reap benefits).

to the OP - another 2c - for version VI - stick to the higher spec models: the spirit-r, RZ, RS, R and bathurst r* - they are worth the extra cash (and, trust me, have more than the 280ps advertised.  The auto versions and base spec are 265ps).

* bathurst r, for all other versions, is a bargain basement spec - but they changed that for the version VI

Thanks alot for the advise, no i am not cashed up so any tip does miracles, especialy when we are talking 40 + grands

Thanks again

RX7 is a nice car , I test drove spirit r the other day and RZ model ( the one that comes with recaro fixed bucket seats, billstein suspension etc). They are brilliant , the power of twin turbo , handling but bear in mind the maintenance and petrol are higher and more expensive than skylines :rofl:

But you won't see 10 rx7 on road every week :) unlike skylines nowadays

How about not buying the car, and investing the money or doing something sensible with it... 40 grand in a nice hedge fund would be cooler than another toy that goes WHOOSH... especially if you are not made of money. now's not a good time to go into debt to buy a liability.

Just my 2 cents, if you want the car go for it.

Lachie

traction - good enough (they all suffer from wheel hop though) - but nothing compared to an evo 7. For basic bolt-ons - you'll get a lot more out of the FD though.

"Nothin beats a hot fd with a big single conversion"

you can easily reach the limits of street tyres with the twins - the fastest I know of is 10.8 400m (non sequential, very low 11 in sequential). And you'll never match the driveability with a single (technology is getting there, but it's not there yet).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks man, I appreciate that. I'll keep it in mind going forward, important to know.
    • I strongly recommend anyone playing with cars chasing anything electric, get a basic understanding of using a DMM, and about 12V DC systems. They're REALLY easy, you only need to know V=IR and how to apply it, and you can work out what your readings should be doing. For a simple check on a light bulb, you're looking for 12V at the positive to the light, a near zero resistance to ground, and then for a small resistance across the globe when unplugged. If one of those values isn't right, you won't get what you need. Now if they're all okay,and you then plug the light in, and it still won't work, you now do a voltage check across the globe positive to negative. It should effectively read full battery voltage. If it's not, especially if it's quite low, the age old V=IR starts to be able to be thought about, you now know though, for the current flowing, there isn't much voltage for the given resistance, but the rest of that V has to be dropping somewhere else. So now do a voltage check from ground of globe, to ground of car, then do voltage check from positive of battery, to positive of the light connector. Things like a high resistance in a wire/join will start to "steal" voltage on you. So now step back through which ever wire, until you find the voltage drop is non existent, you're now before what ever is steal your voltage for example.   There's plenty of YouTube videos, but really worth understanding some V=IR, and doing some even theoretical numbers to start to understand it. Then you'll know what the DMM is telling you.
    • Is Jackie home by Friday?
    • Item 10: Tech Edge wideband sensor interface and display. You’ll need to buy a new sensor. $150. Item 11: part of a Willians 5 point harness. $40 Item 12: OS88 gear display. No need for it now, my PPG sequential came with one. $30
×
×
  • Create New...