Jump to content
SAU Community

Recommended Posts

Well, my auto ECU should be available for testing IF I CAN FIND A BLOODY GEARBOX! :)

Ill donate my stock ECU to testing when i convert, as i have a stock R33 ECU here anyway that ill use as i am changing the harness plug :)

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

've been working with Dr Drift on some of this stuff, though not for the series 1 - I'll be putting the grid board in my S2 sometime fairly soon...

If alex is ripping his out that will give us something to look at for the series 1! Alex, make sure you keep it!!! The S1 ecu has to be like something else!

Alex, the main benefit of a remap is that you keep everything the same (ie factory standard) and just change the bits you need to. Thus things like the consult port, and more importantly all the diagnostics! still work, yet you can change all the engine settings... And you can take it straight back to factory default anytime you want (my new rom downloading program is getting ROMs out of cars better than anything else has by a long way :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Also, i have a stock manual R33 GTST ecu to revert if i need to diagnose.

Let you all know how it goes.

We should start a 1/4 mile thread, but i dont think anyone/only few others have been down the 1/4..?

Well if you have not started one by the time my beast goes down the quarter I'll post it up and request it to be stickied. :P

Might give other people a push to take thiers out :P

Thats true, on Feb 4 at AIR there is an event for $50, should take the Stag and see what she can reel off. Then get the gearbox actuator valve job done at MV Autos (eventually) and go back to compare differences.

Ive never done a 1/4mile time before, but would like to compare differences with snow mode, power and normal. All depending on how warm she gets though........

Hi All,

If you want to catch some awesome GTR and Stagea Drag action from Japan, follow this link. Trust me, these things hammer! Love the Silver Stagea fishtailing at the 60 mark! B)

http://video.google.com/videoplay?docid=-8...417181313&q=gtr

If the link doesn't work, go to Google Video, search for GTR, then look for

Ryugasaki Drag Racing-Nissan Skyline GTR 1/4 mile Battle

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Let you all know how it goes.

Dr Drift can do it (daughter board tune) - and he has a new dyno going in in a few weeks time as well.. :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

So do you know what it is? Post a photo up of the board, and someone might recognise it.. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...