Jump to content
SAU Community

Recommended Posts

Well, my auto ECU should be available for testing IF I CAN FIND A BLOODY GEARBOX! :)

Ill donate my stock ECU to testing when i convert, as i have a stock R33 ECU here anyway that ill use as i am changing the harness plug :)

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

've been working with Dr Drift on some of this stuff, though not for the series 1 - I'll be putting the grid board in my S2 sometime fairly soon...

If alex is ripping his out that will give us something to look at for the series 1! Alex, make sure you keep it!!! The S1 ecu has to be like something else!

Alex, the main benefit of a remap is that you keep everything the same (ie factory standard) and just change the bits you need to. Thus things like the consult port, and more importantly all the diagnostics! still work, yet you can change all the engine settings... And you can take it straight back to factory default anytime you want (my new rom downloading program is getting ROMs out of cars better than anything else has by a long way :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Also, i have a stock manual R33 GTST ecu to revert if i need to diagnose.

Let you all know how it goes.

We should start a 1/4 mile thread, but i dont think anyone/only few others have been down the 1/4..?

Well if you have not started one by the time my beast goes down the quarter I'll post it up and request it to be stickied. :P

Might give other people a push to take thiers out :P

Thats true, on Feb 4 at AIR there is an event for $50, should take the Stag and see what she can reel off. Then get the gearbox actuator valve job done at MV Autos (eventually) and go back to compare differences.

Ive never done a 1/4mile time before, but would like to compare differences with snow mode, power and normal. All depending on how warm she gets though........

Hi All,

If you want to catch some awesome GTR and Stagea Drag action from Japan, follow this link. Trust me, these things hammer! Love the Silver Stagea fishtailing at the 60 mark! B)

http://video.google.com/videoplay?docid=-8...417181313&q=gtr

If the link doesn't work, go to Google Video, search for GTR, then look for

Ryugasaki Drag Racing-Nissan Skyline GTR 1/4 mile Battle

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Let you all know how it goes.

Dr Drift can do it (daughter board tune) - and he has a new dyno going in in a few weeks time as well.. :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

So do you know what it is? Post a photo up of the board, and someone might recognise it.. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...