Jump to content
SAU Community

Recommended Posts

Item: R32 GTSt Front Seats

Item Condition: Mint, You will not find better! (No Marks, Rips, Cig burns)

Reason for Selling: Upgraded

Price and Payment Conditions: $180 for the Pair

Item: R32 Carbon Fibre front strut/tower bar

Item Condition: Good (some rubbing on underside of bar, this cannot be seen when on the car, and will not effect performance)

Reason for Selling: Would not fit under my Carbon bonnet.

Price and Payment Conditions: $60

Item: Interior Trim Panels

Item Condition: Good (trim on rear seat panels is starting to come away, and needs to be glued back on). No Stains, Cig burns etc.

Reason for Selling: Upgraded

Price and Payment Conditions: $40 for the set of 4

Item: R32 GTSt Fuel Pump

Item Condition: Perfect working condition.

Reason for Selling: Upgraded

Price and Payment Conditions: $20

Location: All items are located in Nowra (2 hours drive south of Sydney)

Contact Details: PM or phone 0414792608

post-3204-1137294678.jpg

post-3204-1137295163.jpg

post-3204-1137295240.jpg

post-3204-1137295324.jpg

post-3204-1137306766.jpg

post-3204-1137306903.jpg

post-3204-1137307043.jpg

Edited by Ryno
Link to comment
https://www.sau.com.au/forums/topic/101900-r32r33-parts/
Share on other sites

Item: R32 GTSt Front Seats

Item Condition: Mint (No Marks, Rips, Cig burns)

Reason for Selling: Upgraded

Price and Payment Conditions: $200

Item: R32 GTSt Rear Seats

Item Condition: No Marks, Rips, Cig burns, however Top of seat has sun fading.

Reason for Selling: Upgraded

Price and Payment Conditions: $50

Item: 3" Hi Flow Cat (Xforce Stainless Steel)

Item Condition: Excellent (Used for only 2 months)

Reason for Selling: Upgraded to 4" Magic Cat

Price and Payment Conditions: $80  Payment pending

Item: 3" Cat replacement pipe/Resonator

Item Condition: New

Reason for Selling: Not needed

Price and Payment Conditions: $50

Item: R32 Carbon Fibre front strut/tower bar

Item Condition: Good (some rubbing on underside of bar, this cannot be seen when on the car, and will not effect performance)

Reason for Selling: Would not fit under my Carbon bonnet.

Price and Payment Conditions: $100

Item: R32 Adjustable Pillowball Rear Camber Arms and Traction Rods.

Item Condition: Brand new, Excellent Quality

Reason for Selling: Not needed

Price and Payment Conditions: $200 for the set of 4

I also have all interior trim panels available (to match the seats), plus the window surrounds available.

Location: All items are located in Nowra (2 hours drive south of Sydney)

Contact Details: PM or phone 0414792608

pics of pillow balls and interier trim plz and prices

Link to comment
https://www.sau.com.au/forums/topic/101900-r32r33-parts/#findComment-1867432
Share on other sites

Will those subframe bushes fit a S13?
Yes they will, I believe they fit:

R32, R33, S13, S14, 300ZX

Ok mate,

Consider them sold.. If u still have them that is..

Are u willing to take $70 delivered? I'm in QLD.. postcode:4300

Pm me with your account details.. or if ur willing to do COD that'd be great..

Link to comment
https://www.sau.com.au/forums/topic/101900-r32r33-parts/#findComment-1923123
Share on other sites

the door trims, mainly interested in passenger door  trim but would take them all , whats the comdition of that trim panel?

Thanks

Hey mate,

The passenger side door trim is perfect, with the exception of this area, which I have had repaired. Because it is on the bottom of the trim (near the speaker) it is hardly noticeable.

Cheers, Ryan

post-3204-1139308868.jpg

Link to comment
https://www.sau.com.au/forums/topic/101900-r32r33-parts/#findComment-1930929
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...