Jump to content
SAU Community

Recommended Posts

Hi guys my name is Luke and i am having a massive clearout of parts the shed is full and needs to be emptied. My phone number is 0419 504 332 and my email address is [email protected]

Parts are located in Gippsland but pickup from a mates house in melb can be arranged.

If you feel my prices are unreasonable then feel free to let me know and make a sensible offer on them.

If the part you require is not listed below then feel free to email me as i might have it.

CEFIRO

I have an rb20det motor that came out of a cefiro and is currently running in my r31 skyline. It has just had a new timing belt and spark plugs. The reason for my sale is upgrading to an rb25det. The motor can be viewed as is still running in car now.

- Motor Package including, wiring loom, ecu, turbo etc. $1200

I also have many remains from the half cut small bits and pieces what you can see in the photos is basically all available.

- Bonnet $250

- Bumper and reo $200

R33

I recently purchased a turbo r33 skyline and am keeping the motor and the front brakes for my upgrade. All other parts are still available. There is heaps more than here this is just a guide.

- Auto Gearbox $250

- Drivers Door $250

- Passenger Door $220

- Auto Dash Cluster 85000kms $100

- Front Seats in Great condition $250

- Boot lid with series one wing all lights working $220

- Boot lid with series one wing no lights $150

- 3 Inch exhaust from cat back and Xforce muffler $300

- Front left Quarter * 2 $100 each

- Rear Brakes etc $250

- Diff $250

- Tail Lights $80 each

- Bare Shell damaged needs a VIV but is complied and repairable $1000

- Auto Tailshaft $50

- Mirrors $70 each

- Safety 21 6 point Roll Cage bolt in $650

- R33 NA calipers and rotors one needs machining other freshly done make an offer.

- Other r33 half cut leftovers

R32

- Half cut leftovers from a na.

- Rb20de has manifolds etc just need a wiring loom and coilpacks $250

post-16406-1137328950.jpg

post-16406-1137328852.jpg

post-16406-1137329021.jpg

post-16406-1137329119.jpg

post-16406-1137329159.jpg

post-16406-1137329283.jpg

post-16406-1137329331.jpg

post-16406-1137329374.jpg

post-16406-1137329414.jpg

post-16406-1137329459.jpg

post-16406-1137329499.jpg

post-16406-1137329546.jpg

Edited by r33skyline

price on:

cefiro indicators (orange repeaters in bumper)

cefiro dash, just next to the vents that demist the windscreen there's two sensor holes. Need both of those.

if you have them, pics/prices of the R32 headlights and indicators off the half cut.

also prices on:

cefiro grille

cefiro indicators (next to headlights)

cefiro headlights

I can come pick em up.

hmmm from the 32 - price on the bracket inside where the headunit is (if its there) that holds the headunit in place and if the front indicators are the clear ones with the orange inside a price on them (unless thats y u asked shan :))

Oh those brackets would be in my garage. I'll have to send them to you. Completely forgot you were after semi clears. I might trade mine with you, let me fit them up with the kit and see how they look first.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...