Jump to content
SAU Community

Recommended Posts

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/
Share on other sites

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

lol... I did this, well it wasnt me it was a friend helping me clean the engine bay for the Show & Shine, didnt manage to go :P.

I dont clean my engine bay.

I think drying it with hair drier could be bad? Use a clean lint free cloth and stick it in the coilpack hole and get the water out.!

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871497
Share on other sites

lol

Kinda makes you wonder why the bonnet is there.. and the water run off gutters..

Try dry everything i guess.. you don't want any moisture near electrical wires etc.. take it to a mechanic..

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871568
Share on other sites

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Well.. i mean if he's having "serious" problems take it to a mechanic.. unless you know alot about your car..

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871765
Share on other sites

hahahah nah its all good, i was careful with the dryer and didn't let the coils or wires get too hot or anything and today no miss. Just a huge waste of time. I won't be doing that again, i think silver gtst's idea is a good one.

I used to do it with my vl and it wasn't that bad cause the water could evaporate more easily (no cover). Lesson learnt

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1872456
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...