Jump to content
SAU Community

Recommended Posts

My clock doesn't work at all (doesn't light up) and my climate control keeps forgetting what it was last set to and starts at 25 every morning. I checked all the fuses under the dash - had two blown but neither fixed it (f**k knows what else has been broken lol, I haven't noticed anything).

Anyway, I noticed the A/C fuse is a large one under the hood. I don't spose it's shared by the clock?? I haven't had time to check the fuses under the hood yet, but it wouldn't surprise me... I'm hoping this is the simple answer and that fuse just needs replacing. Otherwise, all my fuses are fine and I have a larger problem :D

Another thing: I've sometimes got the *clack clack clack* noise when the A/C comes on cos of the dodgy actuator/ louvre mechanism slipping. Is there any chance that problem could have caused the fuse to go (if, indeed it's gone)? And hence I need to solve it to stop the fuse from blowing again? Just a thought..

Link to comment
https://www.sau.com.au/forums/topic/102530-r33-ac-clock-share-same-fuse/
Share on other sites

My actuator thing makes that noise, but it doesn't affect my clock or A/C. Everything works perfectly but I wouldn't mind knowing what to do to get rid of that noise!

You might want to check the wiring to the back of the dash panel. If the clock isn't plugged in? I beleive the clock backup power is the same as the A/C backup power. (small power given to them when the car is off) So your A/C prob is just one dodgy wire (backup power), which is why it resets. Your clock might have no power at all by the sounds of it.

Hrmm. Yeah hoping it's a simple and obvious broken connection like you said cos this morning the auto elec made it pretty clear the only kinda problem solving he can do on the car is pretty low-level since they don't work on skylines very often. *fingers crossed* I half expect it to be a common connection broken as it would make sense to me if the clock and A/C both use the same line to remember their settings. But then, the clock is dead altogether, not just forgetful, so who knows

They said it was a potential short circuit in the dash. Makes sense, fuses don't go for no reason :P So the A/C memory and the clock are both fixed now. Oh, and in the brief fiddle I had while driving back to work, I no longer have the "clack clack clack" noise when changing the A/C settings. I wonder if maybe the motor that made that noise was looking for a particular voltage/resistance, and if it couldn't find it cos of the short, it just kept trying and stopped after a preset time (the 5-7 seconds everyone seems to hear the noise). Just a thought..

Yeah :mellow:

Though, I found out yesterday that I've now lost any kinda signal from my head unit regardless of volume / signal source or amp settings... maybe the "short" they found was the signal wire - nice one guys! Goin back monday...

hmm i once lost the memory bit of my climate control. if u look a little to the left of your steering wheel theres a little grilly bit (r33 anyhow) behind there is a plug i think its so the A/C knows the temp??? anyhow, if its unplugged, memory no longer functions i found. hope this may help

Wow, very interesting thread.

My R32 has similar dramas. Aircon compressor will not start and after trying two different clocks neither worked.

Might be time to pull the dash apart? I'm not 100% on what to look for but very interested to read that they are possibly related.

when my clock wire burnt out, the climate control would go always to 25deg everytime i turned the car on, as soon as i fixed the clock it was all good. the clock is also connected to that beepin sound when you open the doors with the lights on or the keys in.

dave....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...