Jump to content
SAU Community

Recommended Posts

lol yeh i do it looks awesome... how ever i dont have the front windscreen tinted, that is illegal... as for the fronts i have been told they are illegal tho i have never had troubles from the cops, despite being defected on numerous occassions they havent noticed the window tints... also mine are 15% which are illegal too :mellow: i rekon do it coz it looks good

G'day, The day we picked our stagea up from the gold coast we had the front door windows tinted at Tint.a.car, Wurtulla, on sunshine coast. We had them use 'Formula 1', the best UV but second darkest tint. I believe the next darker tint was still legal.

Terminal, i knows, but its not smoked, its "UV cut glass"

Could be the same thing though hehe :(

Thats what i ment by, it came like that factory

I personally like the untinted front windows, make the car look PIMP/VIP, the way i like it

After having my celsior with a blacked out rear window, i will never have a car with illegal tinted rear/front windscreens!

35% is legal on front door windows. And ofcoarse it is illegal to tint the front windscreen.

On my old Stagea I tinted my front door windows to 20% (illegal, but seriously, what kinda cop is gonna do you for that) (besides apparently with their light tester thingy it comes up as 27% or something anyway, so you can just say it must've had a slight standard tint when you got them done to 35% :()

Anyhow, I got my old Stag's fronts done to 20% to match the rears and it matched perfectly, never had any trouble with the law and it cost me $100 at Mastertint (perfect job). Its generally $100 plus or minus a bit depending on the company.

Tinted:

post-9001-1137904875.jpg

Techo, Havn't got a pic to post at moment. Can take one if u would like. I see SAM112 posted a pic that looked like it has a matching shade on the front doors, ours doesn't match but I think it is a good shade considering it is legal!.

Our S1 seems to have 3 levels of window colour;

1. The front windscren is clear, although is does have some heat rejection.

2. The front doors and rear screen are slightly tinted.

3. The rear doors and rear sides are heavily tinted.

I am going to cut that down to 2 levels by getting the front doors and rear screen tinted to match the rear doors and rear sides. Based on experience with other cars, even when that is done, the front doors will still appear lighter tint than the rears due to the extra light coming in throught the untinted front screen. This "apparent" difference seems to have been enough to avoid "issues" in the past.

:) cheers :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...