Jump to content
SAU Community

Recommended Posts

Started servicing today.. What purpose does the foam and grate on the underside of the lid for the airbox serve? Can it be removed?

I'll prob replace the crappy paper filter that was in there with an Apex panel.. So the better flow passage the better.

Cheers.

Edited by Drift_Limo
Link to comment
https://www.sau.com.au/forums/topic/103088-stock-airbox-question/
Share on other sites

I would hazard a guess it for sound deadaning (got to somewhere) I dont see any reason why you cant remove it, but why not just leave it, it shouldnt be doing any harm...

If you have a look at the inlet of the lid you will see what I mean. Nissan put so much effort into the flow path design of the snorkel and then screw it up at the end with his lump of foam!

I'm thinking rip it out and maybe pop rivet a thin piece of angled stainless in their nice and snug.. Or just remove.. and leave

What does this POS do!... As soon as I get a definative answer its gooone..

Opinions pls..?

Took mine out on saturday.

made no difference to sound.

only plus side for me is that I could see ow much dust was in it and dirt particles under it.

so in went the vacuum cleaner tip.

Also blocked the bov bleed hole.

just take it out.

it's just for sound deadening.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...