Jump to content
SAU Community

Recommended Posts

Here are the parts, all are available separate and are negotiable. Everything works, is in good order and is cleaned and ready for you.

The RB30/25 is already sold.

Speedo, Tacho and all that jazz (showing very low kays) - $50.00

A/C "radiator" (I think its called a condensor - the thing that sits at the front) $40

A/C compressor, lines and all that stuff (no gas of course) $20

Heater box from behind the dash $20

Ashtry (with woodgrain for some reason) $whatever you like

RB25DE Computer . $40

Full R33 2 door dash with vents (no cracks, looks fine) $50

Glovebox $20

Surround for cluster $20

Kick panels (both sides) $20

Steering arms from both sides (with stock suspension in good nik - no leaks) they are 4 stud though) $100

Induction pipes/air box (whole thing) (suits turbo car or NA) $100

RB20 AFM $80

Radiator in A1 condition (no bent fins - same as a turbo one) $50

All plastics from around the front of a 33 (wheel arches and splash gaurds and stuff) $20

Brake lines (all of the metal ones) $20

Also have a VL N/A head, enjoy that as your new boat anchor!!! This is free to a good home .

Any questions you can PM or mail me.

***Also I have two RB20 turbos.****

One is a genuine low kay Rb20 turbo thats never been overboosted, the other has a chipped blade....

Good one - $150

"bad" one - offers around 50ish :D

Link to comment
https://www.sau.com.au/forums/topic/103186-r33-leftovers/
Share on other sites

Just after the air conditioning line from the compressor to the front condensor cylinder.

pm me

delivered to 2486 :rofl:

Also lower rear left hand control arm if you have it.

Link to comment
https://www.sau.com.au/forums/topic/103186-r33-leftovers/#findComment-1914092
Share on other sites

Just after the air conditioning line from the compressor to the front condensor cylinder.

pm me

delivered to 2486 :rofl:

Also lower rear left hand control arm if you have it.

Hey mate,

No worries, I've both those bits and will pm you later on. :)

Link to comment
https://www.sau.com.au/forums/topic/103186-r33-leftovers/#findComment-1914982
Share on other sites

All pms answered :)AFM is 100% working, and only out as my car uses a AFM'less map.

Its got about 75,000 kms on it, is clean and I'll refund out if it doesn't work :P

Link to comment
https://www.sau.com.au/forums/topic/103186-r33-leftovers/#findComment-1921596
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...