Jump to content
SAU Community

Recommended Posts

sometimes it feels like ive got the hand brake on when i take off n also noticable when im drivin as its jus not as reponsive yes ive checked n i never use it anywayz :D

ive got no idea what it is, been doin it since i bought it .. when i first turned up the boost it seemed to sort it self out and felt a lot more responsive n light but now its come back again, not sure if its jus the weight of the car and the awd (never owned a heavy or awd car) or theres a prob.

has anyone noticed this, is it normal? or have i got a problem?

Link to comment
https://www.sau.com.au/forums/topic/103530-annoying-problem/
Share on other sites

Go and get it checked by a reliable workshop...let them have a drive, they should know what the problem is. Do it before you get caught out like I did... Or you will end up with a BIG hole in your bank account!

Go and get it checked by a reliable workshop...let them have a drive, they should know what the problem is. Do it before you get caught out like I did... Or you will end up with a BIG hole in your bank account!

yeah ive got the day off on Monday, i'll take it in n see what they say then post up what they find in case this can help anyone else later

Maybe even a blocked air filter or intercooler, ie full of crud. Might not be getting enough air? Take off the front bar, take off 'cooler & flush with kero/metho, check all pipes & clean air element.

Give it a run in lower boost & see how it feels (?).... dunno really.

last few days also when i jus start to drive it, it jus drops power then back on an off again in a second must look like im bunny hoppin it hahaha pretty funny in an auto .. dunno if this is related to the other part of the prob but tomorrow i'll drop the cooler and clean it out n also clean the AFM as suggested an see if these solve the prob.

Cheers guys n keep the suggestions rolling there all beneficial :P

last few days also when i jus start to drive it, it jus drops power then back on an off again in a second must look like im bunny hoppin it hahaha pretty funny in an auto .. dunno if this is related to the other part of the prob but tomorrow i'll drop the cooler and clean it out n also clean the AFM as suggested an see if these solve the prob.

Cheers guys n keep the suggestions rolling there all beneficial  :D

Kinda sounds like what I had...

Power would come in then out then in then out... Cept mine did it in all gears :(

I get an odd problems. Ok, well i get two problems.

I replaced my plugs ~5000km ago, i get mis fires sometimes at ~5000RPM. They are BCPRS7-ES i think, at 0.8mm, but they will be replaced soon.

Also, in like 2nd gear, i get smooth acceleration and then suddenly i get a cut out kinda like i am changing gears but i am not, then power is back smooth again.

Also, does anyone get diff clunk here?? I get clunking from my diff when i do a uturn, or when i am pulling up to park on the side of a road, or when doing a tight turn.... whats up with that? It isnt LSD i know for sure.

hmmm... well maybe a bit premature but just bought a new turbo :) i know u guys are gonna gimme sh!t for it, but bought a T04e of ebay cheap cheap ($372.50) brand new internal wastegate

so now jus gotta try n figure out how to replace it ..

Just read a post on removing the turbo from an R33 anyone else here done it before?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
×
×
  • Create New...