Jump to content
SAU Community

Few Quick Traffic Infringement Questions?


Recommended Posts

If you elect to contend a traffic infringement then reconsider and decide it is not worth contending a couple of weeks later can you withdraw your intention to contend, accept and pay the penalty as per the infringement notice and avoid having to go to court?

If you receive an on the spot fine and are given a scrappy Infringement notice on the side of the road should you also get sent a reminder notice in the mail as the payment date gets close?

Thanks

first question: i would say yes, however im not sure how you would go about it, im guessing it would say somewhere on the forms or ring the court or cop station.

second question: i feel no, as you are to pay it, and out of the goodness of their hearts(!!) (the government(?!) they give you a time period to pay it in, its your choice whether you pay now or later, and if you dont, they send you another fine and get more money...

i got a fine in the mail on tuesday for getting done by a camera, i have until the 21st of feb to sign the stat dec and then they will send out the bill quick smart!

Burns it is an often used method to avoid losing a license if your points are low and you almost have some back. You can elect to go to court, then change your mind and pay a small fee in addition to the fine.

sarah, have I met you? You're a long time member but not a big poster. Come along to the barbie tomorrow and say hi.

If you elect to contend a traffic infringement then reconsider and decide it is not worth contending a couple of weeks later can you withdraw your intention to contend, accept and pay the penalty as per the infringement notice and avoid having to go to court?

If you receive an on the spot fine and are given a scrappy Infringement notice on the side of the road should you also get sent a reminder notice in the mail as the payment date gets close?

For the first query, suggest you get in touch with Civil Compliance on 9200 8222 to find out the exact procedure. There'll probably be an administrative fee (as always....) but I'm sure they'll appreciate you saving the court's time :)

As to the second....they don't send out reminders AFAIC. You either pay it within the given time or they assume your going to contest.

They don't usually issue another notice in the mail until the payment date has passed, and then they'll send you a reminder notice with a late fee added. Of course you can ring civic compliance at any time and ask them to send you a reprint and/or extension to pay. You can also ask about withdrawing a court application with no hassles.

Also just fyi, they don't allow installment payments, however if you use bpay you can pay in $10/20 amounts and they just send you a letter saying they don't accept part payment, please pay the rest of the money.. and you end up getting another 10-14 days to pay from the date of the letter. It's easy to drag out a fine for 3-6months. :)

Unless they changed it sometime last year anyway.

I just recently worked out that ANZ takes part bpay payments for rego too ;)

And the funny thing with that, is I got a letter saying if I don't pay the rest within 28 days my rego *will* be suspended as per section of blah law. Even though it ran out in November? (cars been off road).. so does that mean my rego is valid even though I haven't paid it all!?

Kaz you don't need to get another roadworthy if you pay rego within 3 months, but it continues from the original renewal date. So no real answer but a bit of useless info.

lol I'm glad I don't have to get a RW.

Nah I'll show you the letter on the w/end.. I meant that I only paid $100 of my rego and the letter seems to suggest I can drive the car as long as I pay the rest in 28 days... Otherwise the car 'cannot be driven' and may 'incur fines' etc. ;)

Unless I just misinterpreted you caus I'm rushing so I can go pick up my sparkling injectors :)

PS your welding is like GOLD and GEC was like something I would do! (THANKYOU!)

Edited by Kaz180

yeah they do.. if you ring them up and ask em they will apply to have a 'payment plan' setup.. i owe about $600 in parking/speeding etc etc fines..so i organised a plan and now im only paying em $50/month :)

You can do it for anything which ends up at the Perin court... which I believe are most fines..

Also just fyi, they don't allow installment payments, however if you use bpay you can pay in $10/20 amounts and they just send you a letter saying they don't accept part payment, please pay the rest of the money.. and you end up getting another 10-14 days to pay from the date of the letter. It's easy to drag out a fine for 3-6months. ;)

Yeah it is awesome ;

Contend the fine. If it is not processed through court in some time perioid (6 or 12 months, can't remember), then it is dismissed. If it is dealt with;

You can plead guilty, and pay the fine + court costs, complete waste of everyones' time.

Or plead innnocent, found guilty; pay fine +court costs

Or plead innocent, succesfully contest and have the infringement revoked.

what would these court cost be approxamatly.?

and i got a fine a while ago. just noticed that the cop wrote the wrong expiary date (said it expired in 03) for my licence details. anyone been in this position? if so do tell.?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...