Jump to content
SAU Community

Recommended Posts

OG post edited.

Don't forget to pick up this little lost lamb on the way to the gardens folks!

I should also mention that this is not a track day so speed limits apply. Being a public holiday cops will be out in force so keep it under control.

  • Replies 147
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Silver-Arrowz

Don't forget to pick up this little lost lamb on the way to the gardens folks!

Originally posted by Al

Silver-Arrowz

As you come into Geelong pull into Macca's and we will meet you there, then continue to the Geelong waterfront botanical gardens.  I don't know were that is either, but nothing a Melways can't fix :P .

As long as your there Arrowz.....

We'll see ya on the way through to the gardens.

ok easties.. .we gonna meet up at the Ring Road maccas with everybody? because i'd prefer to skip that part if i can as its a bit out of the way.

From what i remember i just get on at Kings Way and straight down the westgate freeway.. Ring road would just be extra for me.

I'd be happy just to meet at Geelong at the botantical gardens. Is that still a goer for you interstate people?

Even if food is more expensive down there, there will be supermarkets and crap (from what i remember!) where we can buy meat, bread, tomato sauce (vital stuff), plastic plates, etc. Its not like in the middle of the bush :D

predator666....

i say you eastern guys could meet where we are picking up Silver Arrowz... just outside of Geelong

that way we go through Geelong as a group.

the lights will split us a fair bit (just they way they are) but that's everywhere.

Will look good for the first 10 km's with it being 3-4 lanes wide :D

APOLLO BAY

There are about 3 supermarkets down there from memory...

plus all the usual take-away's... etc. etc.

i might actually go the fish n' chips as the locally down there get's all the fish fresh of the fishing fleet down there, can't beat quality.

But see on the day. Not too phased

;):);) I may be getting my 'line back tempararily for the w/e!!! :D :D :D

Westsiders we meet at ring road macca's/mobile, then cruise at a legal speed to geelong and meet up with Silver-Arrowz and his interstate buddies, then continue to the gardens.

Should be great!!

See ya then

you go passed the outbound one and take the next exit ~ [about 500m] fitzgerald road, do a u-turn under the bridge and get back on the inbound side...its the only way thats worth doing from where we comin from...




  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...