Jump to content
SAU Community

Recommended Posts

Hey guys and gurls.

SORRY ITS NOT THE GETRAG, but something tuffer.

Are you looking for a serious gear box that can handle up to 900hp (yes that what there running off these in the states in stock form). TUFF hey? Yet to hear anyone beaking them yet to. Mainly used on the Vipers :(

Well i have what your looking for... 1 6speed tremec gearbox. Brand new, never been used.

Bell housing can be made to fit most makes an models, I was going to be using it behind a SR :P Should be good for those 500 - 800hp GTRs getting around bracking boxes..... Or anything else for that matter.

These boxes retail from the $7000 mark and up. If you can find one!!

Asking $5000 ono

DREAMERS CAN BASH OFF

Craig.

Edited by SXER32
Link to comment
https://www.sau.com.au/forums/topic/104995-closed/
Share on other sites

Some information would be nice.. maybe some pictures.. than maybe people won't be so critical of you..

Brand new, never been used

where my mach got it from and what cars its from.....

something there.. just doesn't.. quite match up..

Edited by Links
Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1933550
Share on other sites

OK boys and girls, just got of the phone with a nissan dealer that is also a dealer for nismo and even if it is the same as the R34 GTR (which it maybe, i could be wrong). He couldnt give me a exact price, but said that theyd be selling around the $6000 mark new + shipping from japan.

So if this box is the same, $5000- $4500 is a dam good price.

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1933719
Share on other sites

mate good luck with the sale, if someone really wants they will pay that amount and then again if you really want to sell it you will drop your price. The gen 3 gear boxes go for around 3k and there a t56 (6 speed) also the zf gear box i now for sale going for 4.5k so if someone wants it they will pay it. But judgeing by the previous coments your probably waisting your time here.

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1933869
Share on other sites

You still cant clarify EXACTLY what it is.

Do you seriously believe that someone will pay $6,000 to you, when you dont know for sure what your selling yourself and you cant even confirm for certain what sort of box it is?

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1933983
Share on other sites

well i thought there was only one type, but i was wrong. ill get some pics and more info on the box.

I dont know alot about it cause, my mach wanted to use it on my drift project which was going to make around 500hp atw. And he tracked it down an got it for me. And i trust him over most people cause of the years, exp and training he has.

sorry to sound like a dic bout it. You learn something new everyday.

Craig

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1934060
Share on other sites

Correct me if i'm wrong but wouldn't it be cheaper to get a PPG set up for this price?

And again people correct me if i'm wrong but wasn't someone selling a Trust or HKS dog box for about the same price a few months ago?

I'd rather a PPG gear set for that price.

EDIT: Why would you buy a 6 speed for a drift car? Just curious.

Edited by MADGT4
Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1934255
Share on other sites

Well yes apparently R34 GTR boxes arent as strong or similar strength to R33 GTR boxes which you can pick up for just over a grand or so. Anything to make a buck I guess.

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1934880
Share on other sites

Ok been and looked at the box, and im wrong in that its a tremec 6spd out of the latest HSV and GTs, and they also do run these in the vipers in the states. If you where to buy new from dealer itd be $7000+. IF you can get one. And the tremec is from what ive been told stronger that the getrag?

So sorry for the miss-comunaction. Should of looked first.....

Will be taking pics of it next time im at mach. And price still stands is someone wants it they pay. (still cheaper than from a dealer)

So if you not interested in buying the box then you can leave comments to yourself now. PLEASE.

Craig.

Link to comment
https://www.sau.com.au/forums/topic/104995-closed/#findComment-1936862
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...