Jump to content
SAU Community

Recommended Posts

Just wondering if its possible to fit 225s onto stock r33 rims and also is it worth it??

I know u can fit 215s for that extra grip.. but how about 225s??

Worth havin them on?? or just stick with 215s??

Also is it safer to have 215s all round or just rears??

Thanks for the help guys..

Cheers..

Link to comment
https://www.sau.com.au/forums/topic/105718-are-you-able-to-fit-225s/
Share on other sites

alpinestars-What are the specs of the tyres?? 225s on just rears or front as well?? 50 or 55s??

ahh i see.. hmm thanks for the help samfisher.. will go tyre shop and ask them to see what they can do..

Take my word for it, the 225`s will be ok but feels kinda mushy on quick direction changes or mid speed corners with undulations will allow it to sort of float on the rim.Almost like the car has week suspension bushes but it isn`t.Get the 205 tyres but the money you save off the larger 225`s can be spent on much stickier ones. :P

Fark.. how wide are the 33 stock rims??

They are 6.5" so putting 225's on is a bit like Shaq screwing a midget!

It will eventually get in, but it won't be pretty.

Because I am a drift ricer I run 215/45 on 9"

post-662-1139935306.jpg

Edited by Gojira

Yes, they'll fit (they're about the widest tire you can 'safely/legally' go to on a 6.5" wide rim)

HOWEVER

you're much better off going for a 205/55/16 tyre, as the sidewalls will be stronger/stiffer, and you won't get that "Mushy" feeling (as mentioned in a previous post).. what that is is when the sidewall of the tyre is actually moving from side-to-side and distorting... so while the tyre may be in full contact with the road and have complete traction, you are still getting a sway in the tyre from the sidewall moving around...

However, this doesn't really apply if you're putting 225/50/16 R-Compound semi-slicks or slicks on the rims, as most semi-slicks and slicks have a highly reinforced sidewall to cope with the extreme forces placed on them in high-speed cornering etc!

Whilst what azzurra says is partially correct you will also get less of 'contact' patch on the road due to tyre distortion....by forcing a wider tyre onto a rim the middle of the tyre will flex (not only the sidewall) thus getting a convex shape with air pressure inside it.

Check a couple of tyre websites (stuckeys / dunlop etc etc) for the optimum size you can fit on a particular sized rim.....

on the front the overall diametre wont really affect anything, your car will be 10mm lower at the front from the small diametre.

and 225s on the back of 32 rims is the same as runnin 225s on the back of 33 rims... theyre the exact same size, offset etc etc

alpinestars-What are the specs of the tyres?? 225s on just rears or front as well?? 50 or 55s??

ahh i see.. hmm thanks for the help samfisher.. will go tyre shop and ask them to see what they can do..

yer dude i got 225s on all fours

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...