Jump to content
SAU Community

Recommended Posts

Hey guys,

New to forums and skyline scene in general. I currently drive a S3 RX7 (which im selling to upgrade to a skyline - anyone wanna buy it?! haha) and have a few questions.

First off, i'm thinking of buying a skyline from 'Yahoo Motorsports' and getting it complianced and stuff like that. Has anyone dealt with Yahoo Motorsports? And how was it - all good?

Second, how hard is it to get a Skyline complianced, and how much would it set me back? Never been through the ordeal so i'm not too sure what to expect. I've been searching the forums but haven't found anything useful as of yet. Sorry if it's already been answered.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/105725-hi-few-questions/
Share on other sites

he is good at what he is - cheap

he bring in cheap cars, not quality cars

so get everything check out before you buy and you should be fine

if you buy a lemon you are the only one to blame

15 yrs old Compliance is about $1400 drive in drive out

extra for removing aftermarket parts

most car at that ages has worn bushes which need to replace

and obviously tyres

i remeber someone post up a backyard place, which can do it for a few hundred bucks, try to search in SA section ;)

Edited by Maxx

Maxx: How would I pick a lemon R32 skyline? Just look for oil leaks, thrashed interior, rubber under the gaurds (from burnouts), anything else?

Also where is the place that supplies Compliance for $1400? What else needs to be done after that? Regency + rego then i'm good to go?

Cheers.

my brother just brought a jza70 type r supra from yahoo.

mmm, not that cheap when ya compare to other import brokers like prestige motorsport, imports101, meisei or jspec.

my brothers car was $6500 uncomplied, very average condition, big dent in the drivers door, very worn seat, all bold tyres, a couple to metal, bit of rust, needs new paint job, f*cked exhaust etc...a bit of a lemon

i look at prestige motorsport and they had a white jza70 type r for $8900 landed and complied, a bit more but in much better condtion.

so i would personally get in contact with another company and try them first. if you dont want to have to spend a money on fixing things, it is still buyer be ware tho.

i can send you some internet sites for other companys if you want

Edited by Turbz_13

the problem about import company is they seems to be better condition...in photos. You can only see that much through photo, and u have to wait for zillon years for the car to arrive (e.g. like me!)

at yahoo motorsport at least u see the car in fresh and can send whoever u trust to check the car before u purchase

i can send you some internet sites for other companys if you want

yeh that'd be awesome dude.

yeh Maxx is right, that's whats good about yahoo... I can get some mates to come down and help me suss it a second time if need be. Maxx, do you have the details about the compliancing place that can do it for $1400? Is it a garunteed pass at regency if everything is stock?

I bought my R34 in through Prestige Motorsport. Had a good (but not perfect) experience.

If you are buying an old R32, definitely see it in person and have it mechanically checked out before buying. Don't risk bringing one in from Japan - too big risk.

I believe PVP on Mullers Rd do 15 year old R32s for under $2,000. For R33 and R34s you have to go elsewhere like Best Enterprises and costs around $5,000.

I agree with every one here look around before you buy your car.I got my R33 GTST through a Jap dealer here in Adelaide, I am happy with my car however I think i may have payed too much and I wasn't all that happy with the experience. And after looking in the For Sale section here in these forums I could have bought a R32 GTR for a few thousand more :P . Oh well next time I know where I will go first.

Compliance doen't insure a pass at regency. I have spent many hours out at the inspectioon through work (2-3 hours a week for 12 months). They will go over the car thourghly looking for any un roadworthy parts and some defectable parts ( the amount of time I have spent peeling window tint off of windows)

personally i like things easy so i would buy again allready complianced have u thought of FBI

http://www.fourbrotherimports.com/cart.php...d=5&parent_id=5

i would think there wouldnt be too much saved and is the headache worth the money of not having to go over the pits

try REDLINE MOTOR SPORT on north east road. Bought a r33s2gtst from them and was reasonably tidy and they seem to have alot of r32's in stock. can knock them down a few dollars. i also bought my R32GTR through them and could at look at the jap auction spec's on it with them to check body condition etc. only thing was i had them bring one over [white one }and it got nailed on the way over on the boat and they didnt make me buy it. not to bad blokes just remeber that most are selling for a reason in japan {ie small bingle}. luckly for me my [silver one} was one of the tidiest ones that even tilbrook had seen {had 3 people trying to buy it before i even drove it out of his workshop} good luck and hope you find a nice one. buy the way what do you want for the car {rx7}?

voss used to comply for redlines but my gtr was complied by the yelow wreckers building on the same side of road just before bunnings and direct interiors with the car on the roof {cant think of the name}. could ask them about compliance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...