Jump to content
SAU Community

Recommended Posts

That's sweet as, i'll take 7!

as for a written off stagea, i don't even know where to start looking for one, probably have to import it hey?

A bit late

A damaged Stagea sold last week in Perth thru the Fowles auctions

Apparently Mr-GTR (Steve) has some body shells??

wonder who bought it, i want some bits and pieces from the interior mainly, any ideas who owns it now?

It was a reapirable write-off

Needed a new front, was not that bad

It had over a 140,000km and was dark green stock

It will probably end up back on the road

A guy in the WA section owned it, but the insurance company wrote it off.

You could try some of the bigger wreckers in Perth, if it went for wrecking they would be able to find who has it.

It went thru yesterday

I thought about buying it put the R34 front on it

But wrong colour and too high K's for me.

http://www.fowles.com.au/auctions/lot.aspx...&Number=1869702

The auction centre may tell you who bought it, but probably only if it was bought by a wrecker.

It went thru yesterday

I thought about buying it put the R34 front on it

But wrong colour and too high K's for me.

http://www.fowles.com.au/auctions/lot.aspx...&Number=1869702

The auction centre may tell you who bought it, but probably only if it was bought by a wrecker.

cool cheers, i know the previous owner i used to chat online abit with him, just wondered where the bits might have gone thats all :P

My local nissan dealer was nice enough to get me a part yesterday. one of my hooks that the lugage divider hooks onto in the boot had snapped off when i had stuff in the back. only set me back $15.20 for a new one. he's a bit of a import fan, so i think he likes to help us out when he can.

The first photoshop effort looks ok, whereas trhe Crewman style is just plain wrong - needs a rear canopy, trherefore might as well stay a wagon!

The green-beast Stagea with R34 front looks HORN!!! Mind you a lot of ppl wouldnt know it was derived from a Stagea wagon & not a R34 sedan.

It went thru yesterday

I thought about buying it put the R34 front on it

But wrong colour and too high K's for me.

http://www.fowles.com.au/auctions/lot.aspx...&Number=1869702

The auction centre may tell you who bought it, but probably only if it was bought by a wrecker.

lol you're terrible... what, 2 stageas not enough to keep you satisfied?

lol you're terrible... what, 2 stageas not enough to keep you satisfied?

I was looking at it before I bought the other 2.

I am upto 5 cars at the moment

6 would push me over the edge LOL.

The auction centre may tell you who bought it, but probably only if it was bought by a wrecker.

I'll save ya the trouble... as you may already know, one of the boys at J-Spec picked it up to do an R34 frontend conversion. It arrives in Melbourne on Tuesday.

Green's his favourite colour too... he almost painted the widebody kakimoto in lamborghini green :(.

IF he gets around to doing anything with it. He has a reputation of collecting half done cars :) If he pulls the engine out then I've already got dibs on it :D

The price... put it this way... I was thinking of paying the price, just to pull the engine loom and ECU out and put into my GTS4. By the time its all repaired properly though it'll cost the same as importing one from Japan.

I'm gonna be organising for your guards to be copied down here, and we'll get the rest of the kit from japan (and copied for you). That way everyone's got a complete kit. We were hoping to coax Ernie to give us a copy, but it seems he's sold SkylineImports to some other guy.

IF he gets around to doing anything with it. He has a reputation of collecting half done cars :) If he pulls the engine out then I've already got dibs on it :D

The price... put it this way... I was thinking of paying the price, just to pull the engine loom and ECU out and put into my GTS4. By the time its all repaired properly though it'll cost the same as importing one from Japan.

I'm gonna be organising for your guards to be copied down here, and we'll get the rest of the kit from japan (and copied for you). That way everyone's got a complete kit. We were hoping to coax Ernie to give us a copy, but it seems he's sold SkylineImports to some other guy.

Your taking moulds of the masa gear correct?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...