Jump to content
SAU Community

Recommended Posts

I had to go to the post office earlier today and went down the road to the local westfield in figtree (it is in wollongong). I was no more than 15 minutes inside the centre when i returned to my car and saw that just behind the back right wheel some idiot scraped his car down the side of mine.

Now i usually park as straight as i can right in the middle of the parking spot as i dont want any people to hit my doors with theirs. Now it looks like i have to worry about people not knowing how to reverse out of a spot.

Seriously, it is very frustrating. Some drivers must judge the amount of space they have left by saying, "when i hear a thud or a grinding noise i know thats when i have enough room, but what the hell, i'll keep going anyway."

Damage isn't as bad as it could of been i suppose. Good thing my uncle is a panel beater and owns his own shop so he can fix it back up at a low price (cost if materials and here is a case of beer sort of thing for your time).

Link to comment
https://www.sau.com.au/forums/topic/105950-shopping-centre-carparks/
Share on other sites

be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Edited by lingeringsoul
be selfish, BE VERY SELFISH when parking, take up 2 spots if you can....because your skyline is more precious than the value of what ever thy are driving

Ive considered that, but then i read a few comments some guys posted and they said that they get targeted for taking up 2 spaces. :s

You can't win.

yeh your probably more likely to get your car keyed by taking up to spaces. First time I ever took my line to a shopping center some one reversed into when leaving and chipped a little bit out of my rear bar.. and 2 hours proir to that some one reveresed into smashing my reverse light <_<

Some old fart reversed into my fiancee's car today. She was standing right next to the car when it happened and started yelling at him to stop but he was off in old man's land and just ignored her. I try to avoid car parks.

I have the same scrape on the rear wheel arch of the Zed.

Happened in the carpark at work and the black paint on the bumper of a 4wd that often parks next to me gave a pretty good indication of who might have been responsible.

Funnily enough they haven't responded to the note I left on their windscreen saying I think they might have "accidently" touch parked me.

U think thats bad

i work at Castle Hill RSL and ive been hit 3 times in 1 month since i have started working there

First time was my front guard was dented in, then my rear drivers side quarter panel got dented in with a long scrape and 2 days ago my front bar got 3 large scrapes along the side and is almost falling off

there are cameras in the carpark but they cant tell who actually does the damage

Extremly frustrating......i goto work to earn money ...to pay for the damage that i get from working

Ps. i always park in the middle on the lines and infront of cameras

Anyone know what i can do????

damn skyline17, i think your best bet would be to park on the street or possibly buy a sh*tbox runaround car thats not worth much and is also something you dont really car about if something were to happen to it.

Or get a couple of witches hats and put a couple in the spaces next to you.

Bottom line is some carparks are not for people who actually value their car.

Other option is to always park next to cars more expensive than your own :P

that's what I do.. same goes for detering theives... park next to cars better than yours so they take them instead

I've been to about 25 shopping centres in the past few weeks for work, and the amount of dodgy driving and parking that goes on during hte day, you'd be astonished at some of the shit I've seen!

If your parking in shopping centers that have multi storeys, pick a very large pole to park next too... Park one sie as close as possible to that pole, so the person who parks next to you can swing there door open a little more, and the pole will protect at least the other side of your car.

Thats what I usually do and seems to be working quite well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...