Jump to content
SAU Community

Recommended Posts

Howdy all.

First of all, I know this topic has been posted before so I apologize for bringing it up again.

I am in the process of buying a 96-97 r33 skyline. I live in Sydney. My previous car was an Charade. Great car, handled well, sad to see it go.

Now I've searched the forums. I've had a look at the "What to look for" list and a few topics on buying skylines which I must say helped me out a lot (especially other topics in the forums).

However, I would like to know a few things on top of the ones listed in the forums:

1. After reading the "Post your engine failiure" topic, I take it those problems only happen when the car is under serious loads (ie racing/dragging) or heavy mods done to it. If the car is only going to be driven "normally" (with the ocasional outburst :( ), then there's nothing to worry?

2. I know skylines are reliable, but if looked after properly are there any serious problems that may arise from daily driving (eg engine failures listed in point 1), aside from replacing alternators, gearboxes, clutches?

3. Any recommendations on where to buy a skyline? I've had a look on the net. I've come up with a few places Just Jap, Northshore Priestige, Envy Imports. What about the dealers on Parramatta Rd? I'm not naming names but stories I've heard from those places haven't been promising.

4. Recommendations on places for modyfying skylines. I've been burnt a couple of times when I modded my Charade so I'm somewhere reliable please. Being my first turbo car, I would like to beable to take it somewhere, get the mods done properly by someone who knows what they are doing. I am a bit paranoid this being my dream car, so I'm not saying anything bad about any workshops. Just want peoples advice :D

A few places I looked up were MRT Rally, Unique Autosports, Croydon Racing Developement.

That's all for now guys. Would greatly appreciate any advice. And thanks again for reading the post.

Link to comment
https://www.sau.com.au/forums/topic/106902-ex-ftoer-needs-some-advice/
Share on other sites

Skylines are really reliable when left to their own devices. AS you noted all them engine failures were high powered motors, and failed whilst being flogged (ie leans out at 8000rpm or something like that) I've heard of a few skylines with 200 and even 300K on the clock without needing to be opened up.

Mine has done 135000 kms now (i doubt highly that its genuine k's too, reckon it was wound back in japan) and has only had minor problems. Not blowing any smoke, doin anything too problematic and hasn't cost me anymore than my old vl commo did to keep running.

Its only very mildy modded as u can see in signature and i drive it daily heaps, as well as long trips away. (Done 60, 000 since i bought it 18 months ago)

So unless something unusual happens you should be right in that department (however you;'ll likely get bitten by the modifying bug)

A few places i know to get work done, which are highly recommended, BEL performance in Castle Hill, Advan performance in Silverwater, UAS as u already mentioned, Unigroup engineering, and theres plenty of others i'm sure.

If u have a bit more of a poke around the site you'll find all this info anyway.

As for buying i'd say buy privately but get the car checked out either by nrma or talk to one of the above garages and i'm sure they can do it. As R33S2 said, look at the for sale secction on here, theres plenty to check out. You'll get a better price, probably nicer car with more mods and if u get it checked out properly should be a good car.

i purchased my 1997 Series II R33 GTST from aussie car compliance, www.aussiecarcompliance.com.au

the price i got it for was very good indeed, joel the owner of the compliance shop was pretty cool, he did a really good job compliancing the car, new tyres, full service also regassed the air con,

condition of the car was immaculate! for a 9 year old car it was in really good condition

have a look on hes website, hes just got a few series II's in, give him a ring and organise a test drive, hes more than happy to let you take the car for a spin, and if you get the chance, let him take you for a spin haha did over 130km/h on victoria road castle hill, hes a crazy driver

if your planning to do the modding, i highly recommend getting a fresh import thats either stock, or only had minor mods on it, they have less mileage on them than the ones sold here and will most likely has less problems,

a few members on here purchased their cars from him, and they were all pretty happy with their cars,

ill stay away from envy imports, the sales ppl are rude and arrogant, i originally was going to get my car from them, for the same price i would have goten a 94 series 1 skyline that would have alot more mileage and less mods than the one i got, their prices are way over inflated,

same again with the dealers on parra road, they just put some new chromies on the cars and give it a fresh coat of paint and jack the price up another 3 - 4k than what the the car is worth

shop around and do alot of research on prices as they vary alot on skylines, i spent over 2 months going through dealers online ads etc before i settled on buying my car from joel

hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...