Jump to content
SAU Community

Hks To4r $500 ! + Brand New Rb20/rb25 Manifold.

quicknissan
 Share

Recommended Posts

quicknissan Collaborator

quicknissan

Posted
Posted

HKS T04R. $500 (needs bearings replaced) or $990 Fully Rebuilt by Garret or GCG in Sydney.

So if you are interested, you can buy it as is for $500, or fully rebuilt for $990. The choice is yours.

This turbo is good for around 600HP and is a great turbo for almost any application.

I also have a brand new stainless steel RB20/RB25 turbo manifold, never used, only $450.

Both the turbo and manifold are available now and wont last long, be quick first in to pay gets them.

quicknissan Collaborator

quicknissan

Posted
  • Author
Posted

post-23178-1141134717.gif

Sorry, i just replied to your pm about 5 minutes ago.

Here is a picture of the turbo, I forgot to mention it has a highly polished compressor housing, looks spectacular. As you can see, the manifold is brand new, polished, and looks great too.

Its not the best picture, but you can see the how good the quality of the manifold is, and how good the turbo looks.

quicknissan Collaborator

quicknissan

Posted
  • Author
Posted

Ok, here is the deal, I need to pay some bills tomorrow and I am flat broke, I think I have sold the manifold (waiting for payment) but the HKS T04R is still 100% available.

I will REDUCE the price of the HKS TO4R Turbo to only $400 if you can pay TONIGHT or before 11am tomorrow. Once off price of $400 for this turbo, need to sell it !!!! I will be online all night and will check back before i go to work in the morning. I need cash, someone might get a bargain tonight.

quicknissan.

quicknissan Collaborator

quicknissan

Posted
  • Author
Posted

If it turns out two people pay for the turbo then an immediate refund will be sent tommorow. This is a genuine sale, and I am not here to rip anyone off. So, i will check my bank account tomorrow and if more than one person payed it will be transferred back immediatly.

So, Turbo is sold pending payment, as is sold pending payment. I will reply here after work tomorrow with details.

quicknissan.

51OWW Enthusiast

51OWW

Posted
Posted

Looks like you'll be getting your cash back nismo33 - just spoke to him via sms and cause both manifold and turbo where purchased as a package - he can't really seperate...

Sorry mate.

I *do* however have a trust td06-17c here which was *going* to go on my car if you like? Bought less then a month ago, as a 'just recon'd, never used' turbo. So if you keen on that, give me a pm. Little bit more expensive then this one(not to much more), though, it's in perfect condition.

Ta.

Chris.

nismo33 Proficient

nismo33

Posted
Posted

just spoke to the bank and managed to cancel the transfer,.. its all good now,. no worries.

thanks for the offer 510WW but im sort of looking for sumthin bigger than td06,.. if it were a td07 20g i might consider..its going in a supra.

thanks anyhow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...